Panasonic Broadcast AG-DVX100A Menu Information
Setting menus Configuration of setting menus Menus in the camera mode SCENE FILE CAMERA SETUP SYNCRO SCAN ASPECT CONV COLOR BAR SETUP SW MODE MID GAIN HIGH GAIN ATW HANDLE ZOOM IRIS DIAL USER1 USER2 USER3 AUTO SW A.
Setting menus SCENE FILE screen Item/ (display mode) Description of settings DETAIL LEVEL (Camera) For adjusting the detail amount. –7 --- 0 --- +7 V DETAIL (Camera) For adjusting the strength of the outline compensation in the vertical direction of the images. –7 --- 0 --- +7 DTL CORING (Camera) For adjusting the level at which the noise in the detail signals is to be eliminated. –7 --- 0 --- +7 When this is adjusted in the “–” direction, clearer images are produced but the noise increases slightly.
Setting menus SCENE FILE screen Item/ (display mode) Description of settings SKIN TONE DTL (Camera) For switching the skin tone detail ON or OFF. When ON is selected, the detail in the skin tone areas is diminished and the graininess of the skin is reduced. OFF ON V DETAIL FREQ (Camera) For setting the detail in the vertical direction when shooting in the progressive mode. THIN : The detail is made finer. MID : The detail is made somewhat coarser. THICK : The detail is made coarser.
Setting menus SW MODE screen Item/ (display mode) Description of settings MID GAIN (Camera) For setting the gain value which is to be allocated to the M position of the GAIN switch. 0 dB, 3 dB, 6 dB, 9 dB, 12 dB HIGH GAIN (Camera) For setting the gain value which is to be allocated to the H position of the GAIN switch. 0 dB, 3 dB, 6 dB, 9 dB, 12 dB ATW (Camera) For setting the ATW (Auto Tracking White) function which is to be allocated to the WHITE BAL switch. OFF: The ATW function is not activated.
Setting menus AUTO SW screen Item/ (display mode) Description of settings A. IRIS (Camera) ON: When the AUTO button is pressed, the auto iris control operation is performed. The IRIS button does not work at this time. OFF: The auto iris control operation is not performed even if the AUTO button is pressed. The iris control operation selected by the IRIS button is performed. AGC (Camera) For setting the auto gain control operation when ON is selected as the A. IRIS item setting.
Setting menus PLAYBACK FUNCTIONS screen Item/ (display mode) AUDIO OUT (VCR) Description of settings For setting the audio signals to be output from the AUDIO IN/OUT connectors (pin jacks) when a tape is played back.
Setting menus RECORDING SETUP screen Item/ (display mode) 1394 TC REGEN (VCR) TC MODE (Camera) (VCR) Description of settings For selecting the time code to be recorded when recording the signals of a component connected to the DV connector. OFF: The signals are recorded using the time code which was set using the TC MODE item, TCG item and FIRST REC TC item. ON: The signals are recorded using the time code of the signals which have been input to the DV connector.
Setting menus RECORDING SETUP screen Item/ (display mode) Description of settings UB PRESET (Camera) (VCR) For setting the user’s bit. However, USER must be selected for the UB MODE item setting. INTERVAL REC (Camera) For setting the intermittent recording mode. OFF: Intermittent recording is not performed. ON: When the START/STOP button is pressed, intermittent recording is performed with the cycle set by the REC TIME item and INTERVAL TIME item. ONE-SHOT: The time lapse shooting mode is established.
Setting menus DISPLAY SETUP screen Item/ (display mode) Description of settings ZEBRA DETECT 1 (Camera) For setting the level of the zebra pattern leaning to the left and displayed in the viewfinder and on the LCD monitor. 80%, 85%, 90%, 95%, 100%, 105% ZEBRA DETECT 2 (Camera) For setting the level of the zebra pattern leaning to the right and displayed in the viewfinder and on the LCD monitor. 80%, 85%, 90%, 95%, 100%, 105%, OFF When OFF has been set, the zebra pattern is not displayed.
Setting menus DISPLAY SETUP screen Item/ (display mode) Description of settings SELF SHOOT (Camera) For selecting the LCD monitor’s mirror function for face-to-face shooting. When MIRROR is set, the image on the LCD monitor is reversed at the left and right for display during face-to-face shooting. NORMAL MIRROR EVF MODE (Camera) (VCR) For selecting what is to be displayed in the viewfinder and on the LCD monitor. ON: Images are shown at all times in the viewfinder.
Setting menus OTHER FUNCTIONS screen Item/ (display mode) BEEP SOUND (Camera) Description of settings For setting the beep tone to ON or OFF. OFF ON When ON is selected as the setting, the beep tone is sounded at the times given below. O When the beep tone is sounded, the audio signals from the output connectors are muted, and the beep tone is output instead.