Datasheet

ManualsBrandsPanasonic ManualsMicroswitchesMicro Switch AEQ, 0.1mA, 1CO, 1.7N, Leaf Lever

AEQ1

Panasonic Electric Works

2010.1

www.panasonic-electric-works.com

ORDERING INFORMATION

PRODUCT TYPES

Terminal type (Mounting hole: 3mm standard type / 3mm without boss type)

LOW LEVEL LOAD SWITCH

(100 μA at 3 VDC)

AEQ (EQ)

SWITCHES

Actuator Operating force Max.

Mounting hole: 3mm standard type Mounting hole: 3mm without boss type

Solder terminal PC board terminal

Pin plunger 1.2N AEQ10410 AEQ11510

Leaf lever 1.7N AEQ10417 AEQ11517

Simulated leaf lever 1.5N AEQ10418 AEQ11518

Compliance with RoHS Directive

FEATURES

• Handles low level load 100 μA at 3

VDC to 100 mA 30 VDC

[Minimum switching capacity

(reference value) 10 μA at 1 VDC]

• Ultra-long stroke. For pin plunger

type, it maintains an ultra-long stroke

O.T. (Over Travel) with over 2.2 mm

on the NO side and over 2.5 mm on

the NC side.

• Since contact pressure does not

depend on the operation stroke, the

range of possible use over the entire

stroke is greatly increased.

• Silent operation

TYPICAL APPLICATIONS

• Household appliances

(Cover detection of air conditioners

and air puriﬁers for safety purpose.

Cover destruction detection of crime

prevention devices.)

Size of mounting hole

0: 3 mm standard type

1: 3 mm without boss type

AEQ1

Contact form

1: SPDT

Terminal

4: Solder terminal

5: PC board terminal

Actuator

0: Pin plunger

7: Leaf lever

8: Simulated leaf lever

COM NO NC

03/2010

Summary of content (6 pages)

PAGE 1
AEQ1 LOW LEVEL LOAD SWITCH (100 μA at 3 VDC) Compliance with RoHS Directive AEQ (EQ) SWITCHES FEATURES TYPICAL APPLICATIONS • Handles low level load 100 μA at 3 VDC to 100 mA 30 VDC [Minimum switching capacity (reference value) 10 μA at 1 VDC] • Ultra-long stroke. For pin plunger type, it maintains an ultra-long stroke O.T. (Over Travel) with over 2.2 mm on the NO side and over 2.5 mm on the NC side.
PAGE 2
AEQ1 RATING 1. Rating 100 μA at 3 VDC to 100 mA 30 VDC. [Min. switching capacity (Reference value*) 10 μA at 1 VDC] * This value is a rough indication of the lowest possible low level load at which switching is possible. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. 2. Operation environment and conditions Item Ambient and storage temperature Allowable operating speed Max.
PAGE 3
AEQ1 5. Operating characteristics Item Operating Force (max. O.F.) *Note 2 Total travel Force (max. T.F.) reference value Free Position (max. F.P.) Operating Position on NC side [O.P. (N.C.)] *Note 3 Operating Position on NO side [O.P. (N.O.)] *Note 4 Release Position on NC side [R.P. (N.C.)] *Note 6 Release Position on NO side [R.P. (N.O.)] *Note 7 Over travel on NC side [min. O.T. (N.C.)] Over travel on NO side [min. O.T. (N.O.)] Total Travel Position (T.T.P.
PAGE 4
AEQ1 DIMENSIONS (Unit: mm) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac 1. Solder terminal; Mounting hole: 3mm, standard type Pin plunger External dimensions FP 9.2 MAX. RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 TTP (5.9) C 0. 3 CAD Data 8.4±0.2 13.3±0.15 5.4±0.15 5.4 2.7 1.9 dia. +0.1 3.0−0 9.2 mm max. 8.7±0.3 mm 8.4±0.3 mm 8.8±0.3 mm 8.5±0.3 mm 2.5 mm 2.2 mm +0.3 3.0 −0.2 8.3±0.1 1.2 N (1.8 N) 3.7 4.
PAGE 5
AEQ1 4. PC board terminal; Mounting hole: 3 mm, without boss type Pin plunger PC board terminal 3.0 +0.3 −0.2 CAD Data C 0. 2 0.9 5.08±0.15 5.08±0.15 PC board pattern a. .1 +0 0 − di 0 1. 5.08±0.1 5.08±0.1 NOTES 䡵 Soldering conditions Manual soldering: use soldering irons (max. 350°C, within 2 seconds) capable of temperature adjustment. This is to prevent deterioration due to soldering heat. Care should be taken not to apply force to the terminals during soldering.
PAGE 6
Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Please contact our Global Sales Companies in: Europe Headquarters Austria Panasonic Electric Works Europe AG Panasonic Electric Works Austria GmbH PEW Electronic Materials Europe GmbH Benelux Czech Republic France Germany Hungary Ireland Italy Panasonic Electric Works Sales Western Europe B.V. Panasonic Electric Works Czech s.r.o. Panasonic Electric Works Sales Western Europe B.V.