Datasheet

ManualsBrandsPanasonic ManualsIndustrial RelaysIndustrial relay AEP, 1NO, 80A, Stud Terminal

ds_61C01_en_ep: 300108D

ORDERING INFORMATION

HIGH VOLTAGE AND

CURRENT CUT-OFF

CAPACITY IN A

COMPACT PACKAGE

EP RELAYS

(60A type only)

10A PC board type 10A TM type

60A Screw terminal type

80A Connector type 300A Connector type

FEATURES

1. High-voltage, high-current control

capable

400V DC high-voltage switching cutoff

has been achieved thanks to a sealed

construction with mixed hydrogen gas

and the magnetic arc motion through use

of a permanent magnet.

2. Compact & Low Operating Sound

By using a capsule contact mechanism

that is enclosed with hydrogen gas, high-

capacity cutoff is possible even with a tiny

contact gap. There is little operating

sound, which does not change even

when large currents are cut off.

3. Arc space unnecessary

The enclosure box can be made smaller

thanks to an arc-space-free construction

beyond which the arc will not go.

4. Safety

Since the contacts are enclosed in a

sealed capsule structure, beyond which

the arc will not go, safety is ensured.

5. High contact reliability

The contact part is hermetically sealed

with H

2 mixed gas, hence the contact

resistance remains stable regardless of

the ambient conditions.

6. Mounting direction is not specified

The weight of the movable parts is light,

and also the restoring force is large,

hence the relay is relatively unaffected by

gravity.

7. Wide selection of models available.

Types include PC board type, TM type

(10A), screw terminal type (60A), and

connector type (80A and 300A).

8. Standard compliance

The 60A type is UL and C-UL standard

certified.

TYPICAL APPLICATIONS

1. Cogeneration systems

2. Battery inspection and testing

equipment (charge and discharge

control)

3. Construction machinery

4. AGV (Automatic guided vehicle)

(Unmanned transport carts)

5. Welding equipment

6. Inverter control

7. Solar power generation systems

8. Elevator, etc.

EP Relay

Contact arrangement

1: 1 Form A

3: 1 Form A PC board type*

5: 1 Form A TM type*

AEP 0

Contact rating

1: 10A

6: 60A

8: 80A

9: 300A

Coil voltage

12:

24:

48:

X0:

12V DC

24V DC

48V DC*

100V DC*

Note: *10A type only

Summary of content (8 pages)

PAGE 1
EP (60A type only) HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE EP RELAYS FEATURES 10A PC board type 10A TM type 60A Screw terminal type 80A Connector type 300A Connector type 1. High-voltage, high-current control capable 400V DC high-voltage switching cutoff has been achieved thanks to a sealed construction with mixed hydrogen gas and the magnetic arc motion through use of a permanent magnet. 2.
PAGE 2
EP TYPES Ttpe Nominal coil voltage Contact arrangement Part No. Packing quantity Carton Case AEP31012 25pcs. 100pcs. AEP51012 25pcs. 100pcs. AEP16012 1pc. 20pcs. 80A Connector type* AEP18012 1pc. 20pcs. 300A Connector type* AEP19012 1pc. 5pcs. 10A PC board type AEP31024 25pcs. 100pcs. AEP51024 25pcs. 100pcs. AEP16024 1pc. 20pcs. 80A Connector type* AEP18024 1pc. 20pcs. 300A Connector type* AEP19024 1pc. 5pcs. 10A PC board type AEP31048 25pcs. 100pcs.
PAGE 3
EP 2. Specifications Characteristics Specifications Item 10A type Arrangement Rating 1 Form A 80A 400V DC 300A type 1 Form A 10A 400V DC 60A 400V DC 15A (2min), 30A (30s) 120A (15min) (harness wire: 15mm2) Max. cut-off current — 600A 300V DC (5 cycles)*1 800A 300V DC (1 cycle)*1 2,500A 300V DC (3 cycles)*2 Overload opening/closing rating 30A 400V DC (Min. 50 cycles)*1 180A 400V DC (Min. 100 cycles)*1 120A 400V DC (Min. 50 cycles)*1 600A 400V DC (Min.
PAGE 4
EP 1.-(4) Ambient temperature characteristics (300A type) 2.-(1) Max. value for switching capacity (10A and 60A types) 2.-(2) Max.
PAGE 5
EP DIMENSIONS (Unit: mm inch) 1. 10A PC board type Schematic (Bottom view) External dimensions 2 31.6 1.244 31.3 1.232 0.5 .020 3.0 .118 2 dia. .079 dia. 2 dia. .079 dia. 1.4 4.5 max. .055 .177 max. 34.0 1.339 62.4 2.457 55.9±0.3 2.201±.012 45.0 1.772 11.0±0.3 .433±.012 Coil input terminal 6:Coil 19.5 .768 5:Coil - PC board pattern (Bottom view) (1.0) (.039) After doing through-hole plating +.004 4-2.45+0.1 dia. 0 dia. 4-.096 0 Mounting hole 2-4.2 dia. 2-.165 dia. 9.5 16.5 .374 .650 8.6±0.
PAGE 6
EP 3. 60A type External dimensions Schematic (Top view) 6: Coil 5: Coil 76.0 2.992 61.0±0.2 2.402±.008 49.0 1.929 45.0 1.772 (17.9) (.705) 2.5 .098 2-5.5±0.1 dia. 2-.217±.004 dia. 2 1+ - Load side has polarities (+) and ( ). Coil input terminal (M3.5) 6 38.0 30.2 26.0±0.2 13 1.496 1.189 1.024±.008 .512 1 9.5 .374 6.55 .258 2 - 5 + M4 screw 79.9 3.146 63.9 2.516 61 2.402 M5 screw 26 1.024 2-5.5 dia. 2-.217 dia. 20.0 .787 (terminal height) 62.0 2.441 (terminal height) Bus bar (15sq) 71.
PAGE 7
EP 5. 300A type Schematic (Top view) External dimensions 6: Coil (GND) 5: Coil (V+) 111 4.370 92 3.622 86 3.386 79±0.3 3.110±.012 44 1.732 27 1.063 DC + polarity 1+ 1+ DC − polarity 2- Panel cut-off 79 3.110 60 2.362 27 47±0.3 1.063 1.850±.012 5 6 63 2.480 2− Input and load sides have polarities (+) and (−). Connector Part No.: 7282-1020 (Yazaki)* 47 1.850 3-6 dia. 3-.236 dia. 33-. 60.3 23 di 6.0 a. 12 dia No.6 terminal: Coil, GND . No.5 terminal: Coil, V+ M8 .315 bolt 24.5 .
PAGE 8
EP NOTES 1. When installing the relay, always use washers to prevent the screws from loosening. Tighten each screw within the rated range given below. Exceeding the maximum torque may result in breakage. Mounting is possible in either direction. • M5 screw (60A, 80A and 300A main unit mounting section): 3 to 4N·m • M3.5 screw (60A input terminal): 0.84 to 1.2 N·m • M4 screw (10A PC board type main unit mounting section): 0.98 to 1.2N·m (10A TM type main unit mounting section): 1.8 to 2.