Datasheet

DW (ADW1)
2
ds_61A10_en_dw: 200912D
RATING
1. Coil data
1) 1 coil latching type
2) 2 coil latching type
*Pulse drive (JIS C 5442-1996)
2. Specifications
Notes:
*1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2. Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions
in NOTES on page 4.
*4. Allowable range when in original packaging is –40C to +70C –40F to +158F.
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
66.7mA 45
200mW
110%V of nominal
voltage
5V DC 40.0mA 125
6V DC 33.3mA 180
9V DC 22.2mA 405
12V DC 16.7mA 720
24V DC 8.3mA 2,880
Nominal coil
voltage
Set voltage
(at 20C
68F)
Reset voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
133.3mA 133.3mA 22.5 22.5
400mW 400mW
110%V of nominal
voltage
5V DC 80.0mA 80.0mA 62.5 62.5
6V DC 66.7mA 66.7mA 90  90 
9V DC 44.4mA 44.4mA 202.5 202.5
12V DC 33.3mA 33.3mA 360  360 
24V DC 16.7mA 16.7mA 1,440  1,440 
Characteristics Item Specifications
Contact
Arrangement 1 Form A
Contact resistance (Initial) Max. 100 m (By voltage drop 6 V DC 1A)
Contact material AgSnO
2 type
Rating
Nominal switching capacity (resistive load) 8 A 250V AC
Max. switching power (resistive load) 2,000 V A
Max. switching voltage 250V AC
Max. switching current 8A AC
Nominal operating power 200mW (1 coil latching type), 400mW (2 coil latching type)
Min. switching capacity (Reference value)*
1
100mA 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000M (at 500V DC, Measurement at same location as “Breakdown voltage” section)
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 5,000 Vrms for 1min. (Detection current: 10mA)
Temperature rise (coil) (at 85C 185F) Max. 35C 95F (By resistive method, contact carrying current: 8A, Coil: de-energized)
Surge breakdown voltage*
2
(Between contact and coil) 12,000 V (Initial)
Set time (at 20C 68F) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Reset time (at 20C 68F) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Mechanical
characteristics
Shock resistance
Functional 100 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10s)
Destructive 1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10s)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life
Mechanical Min. 10
6
(at 180 times/min.)
Electrical Min. 5  10
4
(at 8 A 250V AC, resistive load) (at 20 times/min.)
Conditions
Conditions for operation, transport and storage*
3
*
4
Temperature: –40C to +85C –40F to +185F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at nominal switching capacity) 20 times/min.
Unit weight Approx. 8 g .28 oz