Datasheet

DJ (ADJ)
4
ds_61A02_en_dj: 120711J
RATING
1. Coil data
1) Single side stable
2) 1 coil latching
3) 2 coil latching
2. Specifications
Notes:*1.This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2.Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3.In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. For more details, please look at caution for NOTES on page 9.
*4.The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
Nominal coil voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating power
Max. applied voltage
(at 20C 68F)
5V DC
75%V or less of nominal
voltage (Initial)
10%V or more of nominal
voltage (Initial)
100
250mW 130%V of nominal voltage
6V DC 144
12V DC 576
24V DC 2,304
48V DC 9,216
Nominal coil voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating power
Max. applied voltage
(at 20C 68F)
5V DC
70%V or less of nominal
voltage (Initial)
70%V or less of nominal
voltage (Initial)
167
150mW 130%V of nominal voltage
6V DC 240
12V DC 960
24V DC 3,840
48V DC 15,360
Nominal coil voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating power
Max. applied voltage
(at 20C 68F)
5V DC
70%V or less of nominal
voltage (Initial)
70%V or less of nominal
voltage (Initial)
100
250mW 130%V of nominal voltage
6V DC 144
12V DC 576
24V DC 2,304
48V DC 9,216
Characteristics Item Specifications
Contact
Arrangement 1 Form C, 1 Form A, 1 Form B, 1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B
Contact resistance (Initial) Max. 100 m (By voltage drop 6 V DC 1A)
Contact material
AgSnO
2 type (1 Form C, 1 Form A, 1 Form B),
Au-flashed AgSnO
2 type (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B)
Rating
Nominal switching capacity (resistive load)
16 A 250V AC (1 Form C, 1 Form A, 1 Form B),
10 A 250V AC (2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B)
Max. switching power (resistive load) 4,000 V A
Max. switching voltage 250V AC
Max. switching current
16 A (1 Form C, 1 Form A, 1 Form B),
10 A (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B)
Nominal operating power 150mW (1 coil latching), 250mW (Single side stable, 2 coil latching)
Min. switching capacity (Reference value)*
1
100mA 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000M (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact and coil 4,000 Vrms for 1min. (Detection current: 10mA.)
Surge breakdown
voltage*
2
(Initial)
Between contact and coil Min. 10,000 V
Temperature rise (coil) (at 70C 158F) Max. 55C (By resistive method, nominal voltage applied to the coil, max. switching current.)
Operate time [Set time] (at 20C 68F) Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20C 68F) Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Mechanical
characteristics
Shock resistance
Functional Min. 200 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Destructive Min. 1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10s.)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life
Mechanical Min. 510
6
(at 180 times/min.)
Electrical (Resistive load)*
3
(at 20 times/min.)
Min. 10
5
(at 16A 250V AC): 1 Form C, 1 Form A, 1 Form B
Min. 10
5
(at 10A 250V AC): 2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B
Conditions Conditions for operation, transport and storage*
4
Ambient temperature: –40C to +70C –40F to +158F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight Approx. 14 g .49 oz