Datasheet

ABV (BV) Turquoise Switches
–3–
AECTB7E 201510-T
SPECIFICATIONS
■ Rating
■ Characteristics
Note: Test conditions and judgement are complying with “NECA C4505”.
■ Operating characteristics
DIMENSIONS
■ .187 quick-connect terminal
Pin plunger
Standard rating Low-level rating
AgNi alloy + Au-clad contact
Plunger color: Red
3 A 250 V AC (OF 1.96 N), 1 A 250 V AC (OF 0.98 N) 6 V DC 5 mA, 12 V DC 2 mA, 24 V DC 1 mA
AgNi alloy contact
Plunger color: Black
5 A 250 V AC (OF 1.96 N), 3 A 250 V AC (OF 0.98 N) —
Item Specifications
Expected life
Mechanical life (OT: Specified value) Min. 5x10
6
(at 60 cpm)
Electrical life
Nominal rating (OT: Max.) Min. 10
5
(at 20 cpm)
Low-level rating (OT: Specified value) Min. 10
6
(at 20 cpm) OF 0.98N type is Min 5 × 10
5
(at 20 com)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric
strength
Between non-continuous terminals 1,000 Vrms
Between each terminal and other exposed metal parts 2,000 Vrms
Between each terminal and ground 2,000 Vrms
Vibration resistance 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: max. 1 msec.)
Shock resistance Min. 294 m/s
2
(Contact opening: Max. 1 msec.)
Contact
resistance
AgNi alloy contact type
Terminal type: Max. 50 mΩ
Wire leads: Max. 100 mΩ
AgNi alloy + Au-clad contact type
Terminal type: Max. 50 mΩ
Wire leads: Max. 100 mΩ
Allowable operating speed 1 to 500 mm/sec.
Max. operating cycle rate 120 cpm
Ambient temperature −40°C to +85°C
Unit weight Approx. 7 g (Terminal type)
Protection grade IP67 (except exposed terminal part of terminal type)
Actuator
8th digit of
Part No.
Operating Force
OF, Max.
Release Force RF,
Min.
Pretravel PT, Max.
Movement
Differential MD,
Max.
Overtravel OT, Min.
Operating position
OP
Pin plunger
4 0.98N 0.25N 1.6 mm 0.4 mm 0.8 mm 14.7±0.6 mm
5 1.96N 0.39N 1.6 mm 0.4 mm 0.8 mm 14.7±0.6 mm
Hinge lever
4 0.59N 0.098N 3.2 mm 1.2 mm 1.2 mm 15.3±1.2 mm
5 1.18N 0.13N 3.2 mm 1.2 mm 1.2 mm 15.3±1.2 mm
Simulated roller lever
4 0.59N 0.098N 3.2 mm 1.2 mm 1.2 mm 18.5±1.2 mm
5 1.18N 0.13N 3.2 mm 1.2 mm 1.2 mm 18.5±1.2 mm
Short roller lever
4 1.08N 0.20N 1.6 mm 0.5 mm 0.8 mm 20.7±0.8 mm
5 2.16N 0.39N 1.6 mm 0.5 mm 0.8 mm 20.7±0.8 mm
Roller lever
4 0.59N 0.098N 3.2 mm 1.2 mm 1.2 mm 20.7±1.2 mm
5 1.18N 0.13N 3.2 mm 1.2 mm 1.2 mm 20.7±1.2 mm
(by voltage drop 1 A 6 to 8 V DC)
(by voltage drop 0.1 A 6 to 8 V DC)
(Unit: mm) General tolerance: ±0.4
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
22.2±0.1
10.3±0.1
2.8
3.4
Operating
Position
14.7±0.6
Pretravel
1.6 max
2.8
0.5
15.9
5.2
5.2
10.3
10
2.5
4.75
20.2±0.3
33
45.5
42
3.1 dia.
+0.25
–0.05
3.1
+0.25
–0.05
Pretravel PT, Max. 1.6mm
Movement Differential
MD, Max.
0.4mm
Overtravel OT, Min. 0.8mm
Operating Position
OP
14.7±0.6mm
CAD Data