Quick Start Guide

Network Dome Camera · Quick Start Guide
9
No. Description No. Description
1 Black Liner 9 Audio Out
2 Bubble 10 Reset Button
3 Power Interface 11 CVBS Interface
4 Alarm Output A 12 SD Card Slot
5 Alarm Output B 13 Mounting Base
6 Grounding 14 Lens
7 Alarm Input 15 Network Interface
8 Audio In
 Press RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.
 This series of camera supports 12V DC, 24V AC, and PoE power
supply. Please make sure your power supply meets the
demands.