Operating Instructions 5.8 GHz Digital Cordless Answering System KX-TG6071, KX-TG6072, KX-TG6073, KX-TG6074

Multi-unit Operation
38 For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between handsets
– between the handset and base unit
Note:
LIf you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press {OFF}, then press {C}.
To answer the call with the base unit,
press {SP-PHONE} 2 times.
LYou can locate a misplaced handset
by paging it (handset locator).
LWhen paging a unit for an intercom
call, the paged unit beeps for 1
minute.
Making an intercom call
1
{INTERCOM}
2 {V}/{^}: Select the desired unit. i
{Select}
LTo stop paging, press {OFF}.
3 When you finish talking, press
{OFF}.
1 {LOCATOR/INTERCOM}
2 To page a specific handset, enter its
extension number ({1} – {4}).
To page all handsets, press {0} or
wait for a few seconds.
LTo stop paging, press {LOCATOR/
INTERCOM}.
3 When you finish talking, press
{SP-PHONE}.
Answering an intercom call
1
Press {C} or {s} to answer the
page.
2 When you finish talking, press
{OFF}.
1 Press {SP-PHONE} or {LOCATOR/
INTERCOM} to answer the page.
2 When you finish talking, press
{SP-PHONE}.
Note for handset and base unit:
LWhen the ringer volume is set to off,
the handset or the base unit rings at a
low level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between the handset and base unit, or
between 2 handsets. The handset and
base unit, or 2 handsets can have a
conference call with an outside party.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 {V}/{^}: Select the desired unit. i
{Transfer}
3 Wait for the paged party to answer.
LIf the paged party does not answer,
press {C} to return to the outside
call.
4 To complete the transfer:
Press {OFF}.
LThe outside call is being routed to
the unit.
Handset
Base unit
Handset
Base unit
Handset
TG607X.book Page 38 Tuesday, December 12, 2006 1:56 PM