Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
4 Boards
Nortel Secure Router 8012
Hardware Description
4-26 Nortel Networks Inc. Issue 5.3 (6 April 2009)
z
In CT1 mode, the 24 channels can be regrouped as required and can be bound multiple
times.
4.7.2 Front panel
Table 4-26 shows the appearance of the channelized and unchannelized E1 interface modules.
Table 4-27 shows the appearance of the channelized T1 interface modules.
Table 4-26 Description of the channelized and unchannelized E1 interface modules
Silkscreen Appearance of the front panel
4E1A
4E1B
4CE1A
4CE1B
8E1A
LINK
ACT
8E1A
8*E1-120ohm
LINK
ACT
8E1A
8E1B