Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
Nortel Secure Router 8012
Hardware Description 4 Boards
Issue 5.3 (6 April 2009) Nortel Networks Inc. 4-21
z
2-port 100Base-FX Ethernet single/multi-mode optical interface module
(RT-HIC-2FE-SFP)
z
4-port 100Base-FX Ethernet single/multi-mode optical interface module
(RT-HIC-4FE-SFP)
z
8-port 100Base-FX Ethernet single/multi-mode optical interface module
(RT-HIC-8FE-SFP)
4.5.1 Functions
The 100Base-FX Ethernet optical interface module provides the optical interface. The optical
interface enables routers to communicate with the LAN based on the high reliability and high
transmission quality of the fiber.
4.5.2 Front panel
Table 4-17 shows the appearance of the 100Base-FX Ethernet optical interface module.
Table 4-17 Description of the 100Base-FX Ethernet optical interface module
Silkscreen Appearance of the front panel
RT-HIC-2FE-
SFP
RT-HIC-4FE-
SFP
RT-HIC-8FE-
SFP
Table 4-18 describes the indicators of the 100Base-FX Ethernet optical interface module.
Table 4-18 Description of the indicators of the 100Base-FX Ethernet optical interface module
Indicator State and significance
LINK OFF means the link is not connected and ON means the link is connected.
ACT OFF means no data is being transmitted or received on the interface and
blinking means data is being transmitted or received.