Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
Nortel Secure Router 8012
Hardware Description 4 Boards
Issue 5.3 (6 April 2009) Nortel Networks Inc. 4-9
Do not let your eyes near or stare at the optical interface or the fiber interface. The laser beam
is harmful to your eyes.
Figure 4-4, Figure 4-5, and Figure 4-6 show the appearance of the RPU, NPU, and HIC/FIC,
using the the 8FE as an example.
Figure 4-4 Components on an RPU
P
W
R
1
P
W
R
2
12
3
45
6
7
78101213
911
1. Connector 2.Guiding jack 3.Board
4.Board silkscreen 5. Handle 6. Reserved interface
7. 100/1000M Ethernet interface 8. CONSOLE port 9. AUX port
10. 10/100/1000M Ethernet interface 11. Reset key 12. Indicator
13. Captive screw
Figure 4-5 Components on an NPU board
1. Connector 2. Board silkscreen 3. Handle
4. Board 5. Indicator 6. Captive screw