Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
Nortel Secure Router 8012
Hardware Description 2 Power supply
Issue 5.3 (6 April 2009) Nortel Networks Inc. 2-5
2.3 Technical specifications
The following table describes the technical specifications of the power module.
Table 2-4 Technical specificationss of the power module
Item Technical specifications
Dimensions 40.14 mm (H) x 350.00 mm (W) x 224.30 mm (D)
Weight 1.5 kg
AC 100 V AC to 240 V AC
50/60 Hz
Input rated
voltage
Input voltage
DC –48 V DC to –60 V DC
AC 85 V AC to 264 V AC
50/60 Hz
Maximum
input current
Input surge
current
DC –36V DC to –72V DC
AC 10 A Maximum
output current
DC 25 A
Input surge current 36 A
Maximum output current 60 A (3.3 V) 20 A (5 V) 30 A (12 V)
Maximum output power 550 W