Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
Nortel Secure Router 8012
Hardware Description 5 Cables
Issue 5.3 (6 April 2009) Nortel Networks Inc. 5-29
Table 5-14 Pin assignment of the V.35 DTE cable
DB-28 Signal Signal direction DB-25 Signal
6 GND — A Circuit GND
21 GND — B Shield GND
1 TxD+
Æ
P SD+
2 TxD-
Æ
S SD-
19 RxD+
Å
R RD+
20 RxD-
Å
T RD-
Table 5-15 Pin assignment of the V.35 DCE cable
DB-28 Signal Signal direction DB-25 Signal
6 GND — A Circuit GND
21 GND — B Shield GND
19 RxD+
Å
P TxD+
20 RxD-
Å
S TxD-
1 TxD+
Æ
R RxD+
2 TxD-
Æ
T RxD-
23 CTS+
Å
C RTS
13 RTS+
Æ
D CTS
25 DSR+
Å
H DTR
27 DTR+
Æ
E DSR
15 TxCE+
Æ
V SCR+
16 TxCE+
Æ
X SCR-
3 TxC+
Æ
Y SCT+
4 TxC+
Æ
AA SCT-
17 RxC+
Å
U SCTE+
18 RxC-
Å
W SCTE-
11 DCD+
Æ
F RLSD
22 LL
Å
J LL