Router User Manual
Table Of Contents
- Title Page
- Contents
- About This Document
- Overview
- Power Supply
- Heat Dissipation System
- Boards
- 4 Boards
- 4.1 Introduction
- 4.2 RPUs
- 4.3 NPUs
- 4.4 10/100Base-TX electrical interface module
- 4.5 100Base-FX Ethernet optical interface module
- 4.6 1000Base-X Ethernet optical interface module
- 4.7 Channelized and unchannelized E1/T1 interface module
- 4.8 Channelized E3 interface modules
- 4.9 Synchronous serial port module
- 4.10 Channelized and unchannelized POS optical interface modules
- 4.11 HSSI interface module
- 4.12 IPSec encryption HIC module
- 4 Boards
- Cables
- Appendix A List of Indicators
- Appendix B List of Boards
- B List of boards
- B.1 Boards
- B.2 RPU
- B.3 10/100Base-TX FE electrical interface module
- B.4 100Base-FX Ethernet optical interface module
- B.5 1000Base-X Ethernet optical interface module
- B.6 Channelized and unchannelized E1/T1 interface module
- B.7 Channelized E3 interface modules
- B.8 Synchronous serial port module
- B.9 ATM 155M optical interface module
- B.10 Channelized and unchannelized POS optical interface module
- B.11 HSSI interface module
- B.12 IPSec encryption HIC
- B List of boards
- Appendix C Acronyms and abbreviations
- Index
- Cover & Spine
5 Cables
Nortel Secure Router 8012
Hardware Description
5-8 Nortel Networks Inc. Issue 5.3 (6 April 2009)
Figure 5-5 SC/PC optical connector
Figure 5-6 shows the outline of the LC/PC optical connectors.
Figure 5-6 LC/PC optical connector
When you plug in or unplug LC/PC and SC/PC optical connectors, you do not need to rotate
them... The operation procedures and precautions are as follows:
z
When plugging in the fiber connector, be careful to align the fiber head with the optical
interface, and push in the fiber with proper force.
z
When pulling the fiber out, press the clip first, and then pull the fiber connector slightly
and unplug the connector.
5.7 Channelized and unchannelized E1/T1 interface cable
5.7.1 4E1/4CE1 interface cable
The Secure Router 8012 provides two types of 4-port interface cables as shown in Figure 5-7
and
Figure 5-8. They are the 4-port E1/CE1 coaxial cable and 4-port E1/CE1 shielded
twisted-pair cable. E1 cable and CE1 cable are compatible.