Operating Instructions

101
From Settings application:
1. Open Settings.
2. Scroll to Security and open.
3. Scroll to Certif. management and open.
4. Scroll to an authority certificate, press Options and select Trust settings.
5. For each application, select Yes to enable the certificate to verify software, servers,
or browser sites. Select No to disable the certificate from verifying software, servers,
or browser sites.
CALL DIVERT
Divert incoming calls (voice, data) to another number. Network dependent service.
Check status of Call Divert
From Settings application:
1. Open Settings.
2. Scroll to Call divert and open.
3. Press Options and select Check status. Network will send current status message.
Activate Call Divert
From Settings application:
1. Open Settings.
2. Scroll to Call divert and open.
3. Select one or more: All voice calls, If busy, If not answered, If out of reach, If not
available, All fax calls or All data calls.
4. Press Options and select Activate.
5. Select whether calls shall be diverted To voice mailbox or To other number.
6. Enter the phone number and press OK.
Press Find to go to your Contacts to select a number.
7. Network will send confirmation message.
To cancel call diverts, press Options and select Cancel or Cancel all diverts.
Note: Before you change any trust settings, be sure that you trust
the certificate owner and have verified that the certificate
belongs to the listed owner.
Note: If either If not answered or If not available is selected in step 3, then
after step 6, select a Delay time from the list before calls will be diverted.
X700_OI.book Page 101 Wednesday, September 1, 2004 6:47 PM

Summary of content (44 pages)