User's Manual Part 1

1-14
Getting Started
Handset Security
USIM PINs
PIN
4 to 8-digit code used to prevent unauthorized handset use.
⿟
When PIN Authentication is ON , PIN entry is required each time
handset is turned on (with USIM Card installed).
PIN2 Required for call cost setting.
⿟
PIN and PIN2 are set to 9999 by default.
PIN Authentication
Main Menu
4
Settings
4
Security
4
PIN Authentication
1
Enter Phone Password
7
PIN Authentication
7
ON or OFF
7
Enter PIN
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly
entered three times. Cancel PIN Lock or PIN2 Lock by entering PIN
Unblocking Key (PUK/PUK2).
⿟
For information about PUK/PUK2, contact SoftBank Customer Support, General
Information (
Z
P.9-22).
Note
⿟
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
⿟
For procedures required to unlock USIM Card, contact SoftBank Customer
Support, General Information (
Z
P.9-22).
Passwords
Phone Password
<Default> 9999
4 to 8-digit number required to use/change some handset
functions.
■
Change Phone Password
＞
Main Menu
4
Settings
4
Security
4
Change Phone Password
4
Enter current Phone Password
4
Enter new Phone Password
4
YES
Center Access Code (Security Code)
4-digit number specified at initial subscription; required to access
Voicemail via landlines, subscribe to paid content or restrict
handset services.
⿟
For procedures required to change Center Access Code, contact SoftBank
Customer Support, General Information (
Z
P.9-22).
⿟
If entered incorrectly three times, Call Barring settings lock; Center Access Code
must be changed.
⿟
If Security Code has been changed on handset, enter the number to activate/
deactivate Call Barring.
Note
⿟
Write down Phone Password and Center Access Code. Do not reveal Phone
Password and Center Access Code. SoftBank Mobile is not liable for misuse
or damages.