User's Manual

12
■ List of materials used
Where it is used Material/Finishing
Outer
casing
Display surface, back
cover side surface and
battery surface
ABS/UV coating
Display side surface PC+ABS/UV coating
Back cover PC/UV coating
Connector
terminal
Resin part PBT+PC
Metal part Stainless steel/ nickel plating +
tin plating
Connector terminal cover PC, Elastomer/UV coating
Camera lens area PMMA/surface hard coating
Cushion (back cover backside) Urethane
Search button, volume buttons,
infrared data port area, flash area
and power button
PC/UV coating
Display panel Glass, PET/surface hard
coating
Battery compartment surface Glass epoxy substrate
Battery
terminal
Resin part PPS
Terminal area Beryllium copper/nickel plating,
gold plating
Battery
pack
Resin part PC
Label PET
Terminal area Glass epoxy substrate/nickel
plating, gold plating
UIM slot POM
Screw Back cover (4 corners) Steel/nickel plating
Back cover (other than 4
corners)
Steel/chrome plating
Menu button, home button and back
button
PC/aluminum vapor deposition,
UV coating
Label (Battery compartment) Polyester
Label (Battery surface) PC
1Seg
antenna
Tip resin part ABS/UV coating
Metal part (Sleeve area) Cadmium-free brass/chrome
plating
Metal part (Pipe area) Stainless steel
Metal part (Wire area) Nickel-titanium alloy
Hinge area at bottom
part (Lift up area)
Stainless steel/chrome plating
Hinge area at bottom
part (Wire connection
area and pin)
Stainless steel/nickel plating
Holder area Zinc alloy/nickel plating
Compartment PA
microSD
card slot
Resin part LCP
Metal part Stainless steel/nickel plating
Where it is used Material/Finishing
２０１１年５月１２日
午後１０時３４分