User's Manual

Appendix 131
1
[Change start time]
Q Rewriting start time setting screen is displayed.
Q Time is aligned with the clock of P-07C.
2
Enter preferred time W [OK]
Q Set time.
Q Tap [+]/[-] to change update schedule and then tap [OK].
At Scheduled Time
1
[Start rewriting] appears W [OK]
Q After about 3 seconds after [Start rewriting] is displayed, software
update is automatically started.
Q Home screen should be displayed in a location subject to strong
radio wave signals at the scheduled time for software update.
Q If the battery level is not sufficient for software update at the
scheduled time, software update will be performed at the same
time on the following day.
Q If OS upgrading is in process at the scheduled time, software will
not be updated.
Q If an alarm is set at the same time as the scheduled update time,
software update is given priority.
Q If P-07C power is OFF at the scheduled software update time,
software update will be performed at the same time as the
scheduled time after next activation.
1
Home screen W xA W [Settings] W [About
phone] W [Upgrade features] W [Update from
server]
2
[Software Update] W [Yes]
Update file is downloaded.
3
Open the notification panel W Tap notification
4
[Update Now]
The FOMA terminal is restarted and rewriting starts. Once rewriting
is completed, the FOMA terminal is reactivated and appears in
the status bar.
Q If you select [Update later], take Step 3 through 5 when you
update the system.
5
Open notification panel W Confirm rewriting result
W [OK]
Software Update for Upgrading Features
２０１１年５月１２日
午後１０時３４分