User's Manual

Appendix 123
■ 1Seg
■ Cross-border usages
Symptom Check item
Cannot watch 1Seg
broadcasting
Q Check that the device is in service area of the
terrestrial digital TV broadcasting and receives
strong broadcasting signals (zZ page 99).
Q Check channel settings (zZ page 102).
Symptom Check item
Cannot use the
FOMA terminal
abroad
● If antenna mark is displayed:
Q Do you subscribe for WORLD WING?
Check WORLD WING application status.
● If the device is out of service area:
Q Check that the device is in the service area of
global roaming service and receives sufficient
signals.
For service area and available local carriers,
refer to “User Guidebook (Global Services)” or
DOCOMO International Services website.
Q Try different network modes and/or network
operators.
Set [Network Mode] to [GSM/WCDMA] (zZ
page 56).
In [Network operators], find carriers available
for this service (zZ page 56).
Q The failure may be resolved by power cycle of
the FOMA terminal (zZ page 24).
Cannot establish
data
communication
abroad
Q Enable [Data roaming] (zZ page 56).
■ Data management
FOMA terminal
device suddenly
goes off abroad
Q Check that the charge does not exceed the
reference usage limit.
There is a preset usage limit for “global
roaming service (WORLD WING).” Pay for
accumulated usage amount if the amount
reached to the usage limit (zZ Back side of
this document).
Cannot receive
calls abroad
Q Check that the network mode is set to [GSM/
WCDMA] (zZ page 56).
Caller ID is not
notified/Wrong ID is
notified/Notification
features do not
work
Q Even when the caller does not withhold the
caller ID, the ID is not displayed in the FOMA
terminal unless the network or carrier used for
the call notifies it. Moreover, a number other
than caller ID may be notified depending on
networks or carriers used.
Symptom Check item
Data transfer fails Q Check that USB HUB is not used.
Otherwise, malfunction may occur.
Data stored in
microSD card are
not displayed
Q Reload the microSD Card (zZ page 21).
[ ] appears
upon attempt to
view image, or
[ ] appears in
demo and/or
preview mode
Q [ ] may appear if image data are corrupted.
Symptom Check item
２０１１年５月１２日
午後１０時３４分