User's Manual

102 Applications
Setting of Channel List
Set a channel list corresponding to the region of use.
1
1Seg watching screen W xA W [Settings] W
[Channel setting] W Perform operations listed
below:
Auto OFF setting Display a confirmation screen after specified time
of inactivity to end 1Seg watching.Auto OFF
setting is not activated if you select[OFF].
Q Off timer is given priority when the off timer is
also activated.
Reset channel
setting
Delete all channel lists to reset to the default
state.
Delete storage area
for broadcasting
Delete broadcasting data stored for each
channel.
Reset TV setting Restore the factory 1Seg settings.
*1 Use [Switch display] in 1Seg menu to switch displays along with
settings.
Setting of Channels
Select area Select an area in which you watch 1Seg
broadcasting from the area list to configure a
channel list.
Set from current
location
Search for available channels in the current
location and automatically add detected channels
in the channel list.
Switching Channel List
1
1Seg watching screen W xA W [Settings] W
[Select channel list]
Channel list selection screen is displayed.
2
Tap a channel list to activate
Editing Channel List
Q Enabled channel list cannot be edited.
1
Channel list selection screen W Tap a channel list
to edit W Long-touch a channel W Perform
operations listed below:
Notepad information and TV link to associated site may be added
for some data broadcasting programs. The device can show
notepad information or access to associated site from the added
TV link.
Adding TV Link
1
Select a TV link item that can be added in the data
broadcasting area W [Yes]
Q Procedure for adding TV link varies according to programs.
Delete Delete a selected channel from the channel list.
Set remote-
control number
Tap a channel you want to assign new remote-
control number to and select a new remote-control
number.
TV Link
２０１１年５月１２日
午後１０時３４分