User's Manual

1-14
Getting Started
Handset Security
USIM PINs
There are two USIM Card security codes: PIN & PIN2
⿟
PIN and PIN2 are set to 9999 by default.
⿟
PIN/PIN2 can be changed (
Z
P.XX-XX).
PIN
4
to 8-digit code used to prevent unauthorized handset use
.
⿟
When PIN Certification is ON (
Z
P.XX-XX), PIN entry is
required each time handset is turned on (with USIM Card
inserted).
PIN2
Required
to clear call costs or set maximum cost
(
Z
P
.XX-XX).
PIN Certification
Main Menu
4
Settings
4
Security
4
PIN Certification
＞
ON or OFF
7
Enter PIN
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly
entered three times. Cancel PIN Lock or PIN2 Lock by entering PIN
Unblocking Key (PUK/PUK2).
Note
⿟
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and handset
is disabled. Write down PUK/PUK2.
⿟
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center
,
Gener
al
Information (
Z
P
.XX-XX).
Passwords
Phone Password
<Default> 9999
4 to 8-digit number required to use/change some handset
functions.
⿟
e
appears for each digit entered.
⿟
Phone Password can be changed on handset (
Z
P.XX-XX).
■
Changing Phone Password
＞
Main Menu
4
Settings
4
Security
4
Change Phone Password
4
Enter current 4 to 8-digit Phone P
assword
4
Enter new 4 to 8-digit Phone
Password
4
YES
Center Access Code (Call Barring Password)
4-digit number specified at initial subscription; required to access
Voice Mail via landlines, subscribe to fee-based information or
restrict handset services.
⿟
If entered incorrectly three times, Security Code settings lock; Security Code &
Center Access Code must be changed. Reach SoftBank Mobile Customer Center
,
General Information (
Z
P
.XX-XX)
for details
.