User's Manual

11-3
Handset Security
11
Changing PIN/PIN2
󱾀
Set PIN Certification to ON before changing PIN (
Z
P.10-2).
Main Menu
4
Settings
4
Security
4
Change PIN or
Change PIN2
1
Enter current PIN/PIN2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering PIN Unblocking Key (PUK/PUK2).
󱾀
For information about PUK/PUK2, contact SoftBank Mobile Customer
Center, Gener
al
Information (
Z
P.16-30).
1
In PIN lock mode, enter PUK/PUK2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
Note
󱾀
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled (turning off power counts as one incorrect entry).
Write down PUK/PUK2.
󱾀
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center
,
Gener
al
Information (
Z
P.16-30).
Keyguard
Lock handset keys to prevent accidental operation.
󱾀
While locked, appears in Standby.
1
In Standby, press and hold
7
󱾀
To cancel: In Standby,
7 A
[YES]
Note
󱾀
Alternatively, Main Menu
4
Settings
4
Phone Settings
4
K
eyguard
4
.
󱾀
Emergency numbers (110, 119, 118) are dialable even when Keyguard
is active (Entered numbers do not appear on Display). To correct
misentries, press
L
, then re-enter number.
󱾀
When Keyguard is active, handset will not power down. Cancel
Keyguard then press and hold
L
.