User's Manual

10-3
Handset Security
10
Changing PIN/PIN2
⿟
Activate PIN entry before changing PIN (
Z
P.XX-2).
Main Menu
4
Settings
4
Security
4
Change PIN or
Change PIN2
1
Enter current PIN/PIN2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering Personal Unblocking Key (PUK/PUK2).
⿟
For information about PUK/PUK2, contact SoftBank Mobile Customer
Center, General Information (
Z
P.18-32).
1
In PIN lock mode, enter PUK/PUK2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
Note
⿟
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
⿟
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (
Z
P.18-32).
Keyguard
Lock handset keys to prevent accidental operation.
⿟
While locked, appears in Standby.
1
In Standby, press and hold
7
⿟
To cancel: When appears in Standby,
7 A
[YES]
Note
⿟
Alternatively, Main Menu
4
Settings
4
Phone Settings
4
Keyguard
4
.
⿟
Emergency numbers (110, 119, 118) are dialable even if Keyguard is
activated (number does not appear on Display). To correct misentries,
press
L
, then re-enter number.
⿟
If Keyguard is activated, handset will not power down. Cancel Keyguard
then press and hold
L
.