User's Guide
xxxiii
The use of accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements, and should be avoided. The
FCC has granted an Equipment Authorisation for this model handset
with all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model handset is on file
with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID UCE207003A.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications & Internet Association (CTIA)
website at http://www.phonefacts.net.
Your mobile device is a radio transmitter and receiver. It is designed not
to exceed the limits for exposure to radio waves recommended by
international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and
health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and
the highest SAR value for this device when tested at the ear was
0.791 W/kg*. As mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described in this user
guide**. In this case, the highest tested SAR value is 0.467 W/kg. As
SAR is measured utilizing the devices highest transmitting power the
actual SAR of this device while operating is typically below that indicated
above. This is due to automatic changes to the power level of the device
to ensure it only uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions for the
use of mobile devices. They note that if you want to reduce your exposure
then you can do so by limiting the length of calls or using a hands-free
device to keep the mobile phone away from the head and body.
*The tests are carried out in accordance with international guidelines for
testing.
** Please see Electromagnetic Waves on page xxxii for important notes
regarding body worn operation.
We, Panasonic Mobile Communications Development of Europe Ltd.,
declare that SoftBank 820P conforms with the essential and other
relevant requirements of the directive 1999/5/EC.
A declaration of conformity to this effect can be found at
http://panasonic.co.jp/pmc/products/en/support/index.html
If handset is left with no battery or an exhausted one, data may be
altered/lost. SoftBank is not liable for any resulting damages.
Use handset within temperatures of 5°C to 35°C and humidity
35% to 85%. Avoid extreme temperatures/direct sunlight.
Handset may become warm during use or charging. This is not
malfunction.
Exposing lens to direct sunlight may damage color filter and affect
image color.
Soiled terminals may cause poor connection. If the terminals are
dirty, use a dry cloth or cotton swab to wipe them clean.
Clean handset with dry, soft cloth. Using alcohol, thinner, etc. may
damage it.
Avoid forceful rubbing or scratching handset displays.
820P is not water-proof. Avoid exposure to liquids and high
humidity.
• Do not expose handset to precipitation.
• Air conditioned air may condense causing corrosion.
• Do not put handset in damp places like bathrooms.
• On the beach, keep handset away from sun and surf.
• Perspiration in handset may cause malfunction.
European RF Exposure Information
Declaration of Conformity
Handset Care
2DQQM2CIGZZZKKK6WGUFC[1EVQDGT2/