User's Manual Part 3

391
Overseas Use
You can specify the priority order of carriers you are
connected to for when “Network search mode” is set to
“Auto”. You can store up to 20 carriers.
1
m Settings  Network setting
 Int’l roaming  PLMN setting
p You can select the stored carrier to check the stored
contents.
2
i ()  PLMN list select
p To search for a carrier by a name of country, press
l ( ) and select a country name. You can
search also by pressing
l ( ) again from the
Country List and entering a country name.
3
Select a carrier Oo ()
 Select a network type l ()  YES
PLMN Setting
Setting a Carrier to
Preferentially Connect to
<>
Function Menu while PLMN Setting is Displayed
Function menu Operation/Explanation
Set VPLMN to
UPLMN
You can store the carrier you are currently
connected to.
l ()  YES
PLMN list
select
See “Setting a Carrier to Preferentially
Connect to” on page 391.
PLMN manual
select
You can store a carrier by entering a country
code and operator code.
You can store carriers not found in the list.
 Enter a country code (3 digits) and
operator code (2 to 3 digits)
 Select a network type l ()
 YES
Change
priority
 Select a number to change to.
l ()  YES
Delete this
 YES l ()  YES
Delete all
 YES l ()  YES
Information
p When the “DoCoMo” network is available, you are
preferentially connected to it regardless of this setting.
p This setting is stored on the UIM.
p You cannot set this function if the UIM is not inserted.
You can select whether to display, on the Stand-by
display, the carrier you are currently connected to.
1
m Settings  Network setting
 Int’l roaming  Operator name display
 Display ON or Display OFF
You can display whether the carrier you are currently
connecting to supports the circuit switching (CS)
※1
and packet switching (PS)
※2
.
※ 1 The communication system used for voice calls,
videophone calls, SMS, etc.
※ 2 The communication system used for i-mode, i-mode mail,
etc.
1
m Settings  Network setting
 Status in the area
For an incoming voice call or videophone call during
international roaming, you can have the voice guidance
played back to the caller to that effect.
p Even when you activate Roaming Guidance, the caller may
hear the guidance in a foreign language depending on the
overseas carrier.
p Even when you deactivate Roaming Guidance, the caller
hears a calling tone set by the overseas carrier.
p You need to set this function in Japan.
1
m Service  Set Roaming guidance
 Do the following operations.
Operator Name Display
Displaying a Carrier on the
Stand-by Display
<>
■ When you set to “Display ON”
The carrier’s name is displayed on
the Stand-by display. However, when
you use the “DoCoMo” network, the
carrier is not displayed.
Status in the Area
Confirming a Communication System
Carrier’s name
<>
Set Roaming Guidance
Setting Guidance during Roaming
<>
Item Operation/Explanation
Activate  YES
Deactivate  YES
Check setting You can check the setting contents of “Set
Roaming guidance”.
 YES