User's Manual Part 3

382
PC Connection
The following three ways are available for connecting the
FOMA phone to another device:
Connect the FOMA phone to a personal computer provided
with the USB port using the FOMA USB Cable with Charge
Function 01 (option).
This way of connection applies to all types of
communications such as packet communication, 64K data
communication, and data transfer.
p Set “USB mode setting” to “Communication mode”. (See
page 300)
p You need to install the “FOMA communication setup files”
(driver) before use.
Connect a Bluetooth compatible personal computer
wirelessly to the FOMA phone.
This way of connection applies to packet communication
and 64K data communication.
p When you perform data communication by using Bluetooth,
the high speed communication is applied to the FOMA
phone. However, you may not be able to communicate at the
maximum speed, because of the limit of communication
speed of Bluetooth.
p Use a Bluetooth-linked standard modem or a Bluetooth
modem provided by the Bluetooth maker. Contact the maker
of your personal computer or Bluetooth maker for how to
install and to set up.
By using infrared rays, you can send/receive data
between your FOMA phone and another FOMA phone,
mobile phone, or personal computer provided with the
infrared data exchange function. (See page 303)
This applies to data transfer only.
Connect FOMA Phone to Other Devices
Use FOMA USB Cable with Charge Function 01
Use Bluetooth
Use Infrared Data Exchange
The following outline shows a preparation flow for
packet communication or 64K data communication:
For details, refer to the PDF version of “Manual for PC
connection setting”.
Preparation Flow for Data
Communication
For USB connection For Bluetooth connection
Connect a personal
computer to the FOMA
phone using the FOMA
USB Cable with Charge
Function 01 (option).
Connect a personal
computer wirelessly to
the FOMA phone using
Bluetooth.
Install the “FOMA
communication setup
files” (driver).
Check the setting after
installation.
Check the modem.
Install the “FOMA PC
setup software”.
Carry out the setting
manually without using
the “FOMA PC setup
software”.
Connect.
■ When installing “FOMA communication setup files”
(driver)
Use the provided “FOMA P905i CD-ROM”. You are advised
to install “FOMA PC setup software” for establishing the APN
or dial-up setting easily when you communicate.