User's Manual Part 3

381
PC Connection
User authentication (ID and password) may be required at
connection to some access points. In this case, enter your
ID and password on the communication software program
(dial-up network). ID and password are specified by the
Internet service provider or network administrator of the
access point. For details, contact the provider or network
administrator.
If you need FirstPass (user certificate), install the
FirstPass PC software from the provided CD-ROM and
make the setting.
For details, refer to “FirstPassManual” (PDF format) in the
“FirstPassPCSoft” folder on the CD-ROM.
Adobe
®
Reader
®
(version 6.0 or higher is recommended)
is required to see “FirstPassManual” (PDF format). If it is
not installed in your personal computer, install Adobe
®
Reader
®
from the provided CD-ROM to see it.
For details such as how to use it, refer to Adobe
®
Reader
®
Help.
To carry out the communication by using the FOMA
phone in Japan, the following conditions are required:
p The personal computer to be used can use the FOMA USB
Cable with Charge Function 01 (option).
p When connecting using Bluetooth, the personal computer
should support Dial-up Networking Profile of Bluetooth
Specification Ver. 1.1 or Ver. 1.2.
p The PDA to be used should support FOMA packet
communication and 64K data communication.
p Within the FOMA service area
p For packet communication, the access point should support
packet communication of the FOMA.
p For 64K data communication, the access point should
support the FOMA 64K data communication or ISDN-
synchronous 64K.
Even when these conditions are satisfied, if the base
station is congested or the radio wave conditions are bad,
you may not carry out the communication.
About user authentication for accessing
network
About access authentication for using
browser
Conditions of packet communication
and 64K data communication
For the data communication, the following operating
environment is required for your personal computer:
■ PC main unit
PC/AT compatible model
When using the FOMA USB Cable with Charge Function 01
(option):
USB port (Universal Serial Bus Specification Rev1.1
compliant)
When using Bluetooth:
Bluetooth Specification Ver. 1.1 or Ver. 1.2 compliant
(Dial-up Networking Profile)
Display resolution 800 x 600 dots, High Color 16 bits or more
recommended.
■ OS
Windows 2000, Windows XP, Windows Vista
(Japanese version in each)
■ Memory requirements
Windows 2000: 64 Mbytes or more
Windows XP: 128 Mbytes or more
Windows Vista: 512 Mbytes or more
■ Hard disk space size
Unused memory space of 5 Mbytes or more
p The operation on the upgraded OS is not guaranteed.
p The memory requirements and hard disk space size may
vary depending on the system environment.
The following hardware and software programs are
required besides the FOMA phone and personal
computer:
p FOMA USB Cable with Charge Function 01 (option) or
FOMA USB Cable (option)
※
p Provided “FOMA P905i CD-ROM”
※ For USB connection
About Operating Environment
Necessary Devices
Information
p Use a dedicated “FOMA USB Cable with Charge Function
01” or “FOMA USB Cable”. The USB cable for personal
computers cannot be used because the shape of the
connector differs.
p In this manual, operations are described for the case of
using FOMA USB Cable with Charge Function 01.
p If you use a USB hub, the devices may not work correctly.