User's Manual Part 3

373
Network Services
1
2in1 Menu display
 Do the following operations.
Configure 2in1 Setting
Item Operation/Explanation
Mode
switching
You can switch to the mode you use.
 Select a mode.
p When 2in1 is activated, the display for
selecting the mode appears also by
pressing and holding
< for at least one
second with the Stand-by display shown,
and entering your Terminal Security Code.
p When “Mode link” is activated, the
confirmation display appears telling that the
setting for “Receive avoidance set.” is also
changed.
Phonebook
2in1 setting
You can change Phonebook 2in1 Setting for the
Phonebook entry stored in the FOMA phone.
 Select an item.
Set to A
. . . . Sets as the Phonebook entry
for A. You can use it in A Mode
and Dual Mode.
Set to B . . . . Sets as the Phonebook entry
for B. You can use it in B Mode
and Dual Mode.
Set to Common
. . . . . . . . . . . Sets as the common
Phonebook entry for A and B.
You can use it in all modes.
 Select a setting method.
Set one
. . . . Sets a Phonebook entry you
call up.
Set some . . . Select multiple Phonebook
entries from the Phonebook List
you call up, then press
l ().
S et group . . . Sets a Phonebook group you
call up.
Stand-by
display
You can set the Stand-by display that appears
in Dual Mode or B Mode.
 Select a mode  Set the Stand-by display.
p See page 104 for how to set the Stand-by
display. However, “
i α ppli display” is not
displayed.
p If you select “Release”, the setting returns to
the default.
Set call/
receive No.
(Disp. call/
receive No.)
You can set the character font of phone
numbers displayed on the Dialing/Call
Receiving display, detailed Dialed/Received
Call display, detailed Redial display, and
detailed Sent Chaku-moji Message display for
when you make/receive calls by Number B.
 Pattern 1 or Pattern 2
Set call/
receive No.
(Ringtone set.
for No. B)
You can set a ring tone for Number B and a
mail ring tone for Address B.
 Select an item.
Phone
. . . Sets a ring tone for voice calls.
Video-Phone
. . . . . . . . . Sets a ring tone for videophone
calls.
Mail . . . . . Sets a ring tone for i-mode mail
messages and SMS messages.
 Select a type of ring tone.
Go to step 3 on page 98.
p If you select “Release”, the setting returns to
the default.
2in1 function
OFF
You can deactivate 2in1.
 YES
Receive
avoidance set.
(Change recv.
avoid.)
You can set Receive Avoidance Set.
manually for number A and number B.
 Change recv. avoid.
 A Number or B Number  Select an item.
Unchange
. . . . . . . . Does not change Receive
Avoidance Set.
Receive
. . . . . . . . Receives the calls to the selected
phone number.
Avoid . . . Avoids the calls to the selected
phone number.
l ()
p When “Mode link” is activated, the
confirmation display appears telling that it is
necessary to change the setting to
“Deactivate”.
Receive
avoidance set.
(Check recv.
avoidance)
You can check Receive Avoidance Set.
 Check recv. avoidance
Receive
avoidance set.
(Mode link)
You can activate/deactivate Mode Link. When
you activate it, Receive Avoidance Set.
automatically changes by linking to switching
of the mode of 2in1; You can receive a call to
only Number A when in A Mode, to only
Number B when in B Mode, and to both
Number A and B when in Dual Mode.
 Mode link  YES
Receive
avoidance set.
[Recv. avoid.
(abroad)]
You can operate Receive Avoidance Set.
from overseas.
 Recv. avoid. (abroad)  YES
 Operate following the voice guidance.
p When “Mode link” is activated, the
confirmation display appears telling that it is
necessary to deactivate it.
Item Operation/Explanation
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ