User's Manual Part 3
372
Network Services
By switching this setting, you can make all calls from a
specified phone number.
1
m
Service
Multi number
Set multi
number
Select a phone number.
Basic Number
. . .Dials by the contracted phone number.
Additional Number1/2
. . .Dials by an additional number.
p
When the registration name is changed, each
registration name is displayed. However, the registration
name is not displayed during Personal Data Lock.
2
YES
Before making a call, you can select a phone number to
be notified to the other party from a Function menu,
and then make a call.
1
Enter a phone number
or
bring up the detailed display of a
Phonebook entry, redial item, dialed call
record, or received call record.
2
i
()
Multi number
Select a phone number.
p
To cancel the additional number, select “Cancel prefix”.
p
When you have not signed up for Multi Number, your
basic number is used for dialing even if you select an
additional number.
You can check a phone number set for “Set multi number”.
1
m
Service
Multi number
Check setting
You can set a ring tone for calls that come in to the
additional number.
1
m
Service
Multi number
Set as ring
tone
Select an additional number.
Go to step 2 on page 98.
When the ring tone is set to “Same as ring tone”, the ring
tone will be the one set for “Phone” or “Videophone” of
“Select ring tone”.
Set Multi Number
Set Own Phone Number when Making a
Call
Information
p
If you select “Basic Number” or “Additional Number1/2”, “
:
590
＃
”, “
:
591
＃
”, or “
:
592
＃
” is added after the phone numbers.
Check Setting
Set as Ring Tone
You can use two phone numbers/mail addresses on
your single FOMA phone. By using respective modes,
you can operate your FOMA phone as if you are using
two sets of them.
The following three modes are available with 2in1:
A Mode
You can use your phone number (Number A) to make calls
and your i-mode mail address (Address A) to send/receive
mail messages, and can browse their related data.
B Mode
You can use your 2in1 phone number (Number B) to make
calls and access the sites for Web mail (Address B), and
can browse their related data.
Dual Mode
This mode has the functions of both A Mode and B Mode.
p
For details on 2in1, refer to “Mobile Phone User’s Guide
[2in1]”.
p
Address B is used to send/receive mail messages via the
dedicated Web mail site.
p
You can use packet communication even in B Mode if you
subscribe to i-mode.
p
You can subscribe to either 2in1 or Multi Number.
p
When you replace a UIM with another one (2in1 contractor
→
2in1 contractor) while using 2in1, perform “2in1 function
OFF” (see page 373) and then set “2in1 setting” to “YES”, or
perform “Auto acquire No. B” (see page 342), to acquire the
correct Number B.
When you replace a UIM with another one (2in1 contractor
→
2in1 non-contractor), perform “2in1 function OFF” as well
to update the owner’s information to the correct one.
p
See page 375 for how this service works for each mode.
1
m
Service
2in1 setting
Enter your Terminal Security Code
YES
When you activate 2in1, the 2in1
Menu display appears.
p
This display appears also by
pressing and holding
<
for at
least one second with the FOMA
phone open and entering your
Terminal Security Code.
2in1
Using 2in1
Activate 2in1
<>
2in1 Menu display2in1 Menu display