User's Manual Part 3

371
Network Services
You can activate/deactivate the functions you selected
in Arrival Call Act and can check the setting contents.
1
m Service  Set in-call arrival act
 Do the following operations.
You can set “Voice mail” or “Call forwarding” to be
operated from touch-tone landline phones, public
phones, DoCoMo mobile phones, or others.
p To use “Voice mail” or “Call forwarding” overseas, you need
to set “Remote control” to “Activate” in advance.
1
m Service  Remote control
 Do the following operations.
Answer If you have set “Call waiting” to “Activate” and
receive a voice call during a voice call, you
can use “Call waiting”. Any of the following
operations is available during a voice call
(when “Call waiting” is set to “Deactivate”),
during a videophone call, or during 64K data
communication.
p You can answer incoming voice calls,
videophone calls, or 64K data
communication after finishing the current
voice call, videophone call or 64K data
communication.
p From the Function menu, you can manually
operate voice calls, videophone calls, or
64K data communication that come in
during a call.
p When “Voice mail” or “Call forwarding” is set
to “Activate”, your FOMA phone follows that
setting.
Set In-call Arrival Act
Item Operation/Explanation
Item Operation/Explanation
Activate  YES
Deactivate  YES
Check setting You can check the setting contents of In-call
Arrival Act.
Information
p You can set and confirm this setting from the FOMA phone
with your own UIM inserted. You cannot remote-control the
setting from landline phones, public phones, and other
mobile phones.
Remote Control
Setting Remote Control
<>
Item Operation/Explanation
Activate  YES
Deactivate  YES
You can add and use the additional number 1 and 2 at
maximum as the phone numbers of your FOMA phone
besides the basic number.
p When you remove or replace the UIM, the multi number
settings (name, phone number, etc.) stored in the FOMA
phone might be erased. In this case, store them again.
p The name that corresponds to each multi number (Basic
Number/Additional Number1/Additional Number2) appears
on the Dialing display/Call Receiving display.
p When you make a call from Redial, Dialed Calls, or Received
Calls, the multi number of the call you dialed/received at that
time appears and is dialed.
You can edit the registration name for the basic
number, register additional numbers, and edit the
registration names for them.
1
m Service  Multi number  Number
setting
 Select a phone number.
p You can register/edit also by pressing i ( ) and
selecting “Edit” or by pressing
l ().
p Select the basic number or registered additional
number to check the registration name and phone
number.
p To reset the registration name of the basic number,
press
i ( ) and select “Reset BasicNo. name”,
then select “YES”.
p To delete the registered additional number, press
i ( ) and select “Delete this” or “Delete all”,
then select “YES”.
2
Enter a registration name
 Enter a phone number.
p You can enter up to 8 full-pitch/16 half-pitch characters
for a registration name.
p You cannot edit the phone number of the basic number.
Check setting You can check the setting contents of Remote
Control.
Information
p You can set and confirm this setting from the FOMA phone
with your own UIM inserted. You cannot remote-control the
setting from landline phones, public phones, and other
mobile phones.
Multi Number
Setting Additional Number
Number Setting
Item Operation/Explanation
<>