User's Manual Part 3

367
Network Services
You can answer the held call after finishing the current
call.
1
During Multi calling h
The ring tone sounds.
2
Press d or Oo ().
p When the other party you have been talking with ends
the call, press
d to talk with the party on hold.
1
During Multi calling i ()
 End held call
This service forwards incoming voice calls/videophone
calls when you are in a place where radio waves do not
reach, the power is turned off, or you do not answer
calls within a specified time.
p When Record Message (see page 67) or Remote Monitoring
(see page 73) is simultaneously activated and you want to
give Call Forwarding Service priority, set its ring time shorter
than that for “Record message setting” or “Remote
monitoring”.
p When you do not answer an incoming voice call or
videophone call while Call Forwarding Service is set to
“Activate”, the call is stored as a missed call in “Received
calls”, and the “Missed call” desktop icon appears on the
Stand-by display.
p When a call comes in while Call Forwarding Service is set to
“Activate”, the ring tone (specified by “Select ring tone”) will
sound. (You can change the ring time for incoming calls. See
page 367.) If you answer the call within the specified time,
you can start talking.
p You can just press keys to forward incoming calls. Also, you
can forward the call that comes in during a call.
Step 1: Store the phone number of forwarding
destination.
Step 2: Set Call Forwarding Service to “Activate”.
Step 3: A call comes into your FOMA phone.
Step 4: The call is automatically forwarded to the
specified destination if you do not answer.
End a Call to Answer the Held Call
End a Held Call
Information
p When another call comes in while the current call is put on
hold, the held call is released.
p When another call comes in during Multi-calling, the Call
Receiving display appears. Press
+i ( ) and select
“End held call” to end the held call. If you select “End talk”,
you can end the current call.
Call Forwarding
Using Call Forwarding Service
Basic Flow of Call Forwarding Service
<>
1
m Service  Call forwarding
 Do the following operations.
1
1429d

Operate following the voice guidance.
p For details, refer to “Mobile Phone User’s Guide
[Network Services]”.
Use Call Forwarding Service
Item Operation/Explanation
Activate  Register fwd number  Enter the phone
number of forwarding destination.
p Press B o to select the phone number from
the Search Phonebook display. (See page 89)
 Set ring time
 Enter a ring time (seconds).
p Enter from “000” through “120” in three
digits.
 Activate  YES
Deactivate  YES
Change
forwarding No.
 Enter the phone number of forwarding
destination
 Select an item.
Change No.
. . . . Select this when Call Forwarding Service
is activated.
Change No. +Activate
. . . . Select this while Call Forwarding Service
is deactivated and you want to activate
the Service as soon as the forwarding
destination is changed.
p Press B o to select the phone number from
the Search Phonebook display. (See page 89)
Setting if fwd.
No. busy
You can set an incoming call to be connected
to the Voice Mail Service Center when the
forwarding destination is busy.
You need to subscribe to Voice Mail Service
to use it.
 YES
Check setting You can check the phone number and ring
time of forwarding destination.
Information
p If you answer the call while ringing, the call is not forwarded;
you can talk.
p If you are out of reach of radio waves or the power is turned
off, the ring tone does not sound and the call is
automatically forwarded. The call fee from the forwarder to
the forwarding destination is charged for the forwarder who
has subscribed for the service.
p If the ring time for Call Forwarding Service is set to 0
seconds, the calls are not recorded in Received Calls.
Set On/Off of Forwarding Guidance