User's Manual Part 3

366
Network Services
When a call comes in during a call, this service notifies
you of it by the ring tone in call, and enables you to
place the current call on hold to answer the new call.
Further, you can make a call to another person putting
the current call on hold.
p To use Call Waiting Service, set “Arrival call act”
(see page 370) to “Answer” in advance. When another option
is set, you cannot answer a voice call during a voice call
even if you set “Call waiting” to “Activate”.
1
m Service  Call waiting
 Do the following operations.
You can answer another call putting the current call on
hold.
1
Another call comes in during a call d
The current call is automatically
put on hold so that you can
receive another call.
p “Multi calling” is displayed when
there is the party on hold.
p Each time you press d , you
can switch the parties you can talk with.
Call Waiting
Using Call Waiting Service
Use Call Waiting Service
<>
Item Operation/Explanation
Activate  YES
Deactivate  YES
Check setting You can check the setting contents of Call
Waiting Service.
Answer an Incoming Call during a Call
Information
p For an incoming call or communication that is not supported
by Call Waiting, press
-d from the Call Receiving display
to show the confirmation display telling that you can answer
a new call if you end the current call.
Press
-h to end the current call, and then the Call
Receiving display appears. When you select “OK”, the Call
Receiving display during a call returns.
You can answer another call after finishing the current call.
1
Another call comes in during a call h
The ring tone sounds. You can answer the new call.
1
Another call comes in during a call
i ()  Do the following operations.
You can make a call to another party putting the current
call on hold.
1
Enter another party’s phone number during
a call
d
You can talk with the party you
have dialed.
The call with the first party is
automatically put on hold.
p “Multi calling” is displayed when
there is the party on hold.
p Each time you press d , you can switch the parties
you can talk with.
p If a call comes in during a videophone call, the FOMA
phone operates as follows:
・ The moving image, i-motion movie or Flash movie set as
the image for incoming calls is not displayed.
・ A “Pre-installed” substitute image is sent to the other
party of the current call.
・ The vibrator does not work.
p When a voice call comes in while dialing 117, you hear an
in-call ring tone but cannot answer that call. The call is
recorded as a missed call in Received Calls.
End a Call to Answer Another Call
Information
Continue the Current Call
Function menu Operation/Explanation
Call rejection You can reject a new incoming call and
resume the current call.
Call forwarding You can forward a new incoming call to the
forwarding destination and resume the current
call.
Voice mail You can connect a new incoming call to the
Voice Mail Center and resume the current call.
Information
p Incoming calls are rejected during a videophone call,
Remote Monitoring or answer-hold (On Hold), or while
Record Message is working. The “Missed call” icon appears
when the current call ends, and the call is recorded in
Received Calls. (The “Missed call” icon might not appear
and the received call record might not be recorded
depending on the contracts and setting for Voice Mail, Call
Waiting, and Call Forwarding Services.)
Hold a Call to Make a New Call