User's Manual Part 3

365
Network Services
1
m Service  Voice mail
 Do the following operations.
Use Voice Mail Service
Item Operation/Explanation
Play
messages
You can play back messages recorded as the
Voice Mail.
 YES  Operate following the voice
guidance.
Activate  YES  YES
 Enter a ring time (seconds).
p Enter from “000” through “120” in three
digits.
Deactivate  YES
Set ring time You can set the ring time until the call is
connected to the Voice Mail Service Center.
 Enter a ring time (seconds).
p Enter from “000” through “120” in three
digits.
Check setting You can check the setting contents of Voice
Mail Service.
Setting You can switch the setting contents of Voice
Mail Service.
 YES  Operate following the voice
guidance.
Check new
messages
See page 364.
Message
notification
You can set the ring tone to sound when a
new message is recorded. The ring tone set
for “Mail” of “Select ring tone” sounds for
about five seconds.
 YES or NO
Erase icon You can erase the Voice Mail icons (such as
) from the Stand-by display.
 YES
Activate
notice call
When you are out of reach of radio waves or
the power is turned off, you are informed of
the received call records by SMS messages.
Up to five received call records per SMS
message are notified.
 Select an item.
All calls
. . . . Informs you of all received calls.
Calls w/ caller ID
. . . . Informs you of only the calls that notified
the phone number.
 YES
Deactivate
notice call
 YES
Notice call
status
You can check the setting contents of notice
call.
You can connect an incoming call to the Voice Mail
Service Center just by a simple key operation. Even if
you do not set Voice Mail Service to “Activate”, the
service will be available using this function.
1
During ringing i ()  Voice mail
p You can connect the incoming call to the Voice Mail
Service Center also by pressing
i ( ), and
pressing
s .
You can automatically connect the calls coming from
the phone numbers stored in the Phonebook to the
Voice Mail Service Center regardless of the Activate/
Deactivate setting for the Service.
You can specify up to 20 phone numbers.
This setting is valid only when the caller notifies his/her
phone number.
It is advisable to activate “Caller ID request” at the
same time.
1
Detailed Phonebook display i ()
 Restrictions  Enter your Terminal
Security Code
 Voice mail
“Voice mail” is indicated by “ ★ ”.
p To release “Voice mail”, perform the same operation.
Information
<Play messages> <Setting>
p You cannot operate during a call.
p If you press -0 through -9 , -a , or -s following
the voice guidance, you may not be able to end the call by
pressing
-h . In this case, press -h again.
<Set ring time>
p If “Set ring time” is set to 0 seconds, the calls are not
recorded in Received Calls.
<Erase icon>
p Even if you erase the Voice Mail icons, the messages held
at the Voice Mail Service Center are not erased.
<Activate notice call>
p Even when you set to reject all SMS messages, you are
informed by SMS message of the received call records.
Forward an Incoming Call to Voice Mail
Service Center during Ringing
Forward Specified Calls to Voice Mail
Center
Information
p When a call comes in from the phone number set with this
function, the ring tone sounds for about one second and
then the call is connected to the Voice Mail Service Center.
You will be notified of the call by the icons on the desktop
(see page 67 and page 112) and “Received calls”.
p Even if you set this function, all incoming calls are not
connected to the Voice Mail Service Center when you set
“Personal data lock” while Voice Mail Service is deactivated.