User's Manual Part 3

364
Network Services
You can check whether any message is held at the
Voice Mail Service Center.
1
m Service  Voice mail
 Check new messages  OK
Check New Messages
Checking New Voice Mail
Messages
<>
■ About checked results
p If any voice mail message is held, the “Voice mail” icon
( ) and another Voice Mail icon such as “ ” appear
to inform you of the held message.
p To erase the Voice Mail icon such as “ ”, dial at the
Voice Mail Service Center for saving or erasing the voice
mail message or follow the operations of “Erase icon”.
p The Voice Mail icons switch among , , , etc., and
(6 or more messages) according to the number of the
messages held at the Voice Mail Service Center. The
displayed number is the number of messages informed by
the guidance when you play back new messages. Saved
messages are not included.
p If you set “Message notification”, the ring tone sounds each
time a message is added.
p See page 365 for how to play back voice mail messages.
■ When “ ” appears
You cannot check voice mail messages. Move to a place
where “ ” is cleared.
This service provides an answer message for incoming
voice calls/videophone calls and then holds voice mail
messages on behalf of you when you are in a place
where radio waves do not reach, the power is turned
off, or you cannot answer calls.
p When Record Message (see page 67) is simultaneously
activated and you want to give Voice Mail Service priority, set
its ring time shorter than that for Record Message.
p When you do not answer an incoming voice call or
videophone call while Voice Mail Service is set to “Activate”,
the call is recorded as a missed call in “Received calls”, and
the “Missed call” desktop icon appears on the Stand-by
display.
p Voice Mail Service is valid for voice calls and videophone
calls.
p A voice mail message can be recorded for up to three
minutes. Twenty messages can be recorded respectively for
voice calls and videophone calls and held at the Center for
up to 72 hours.
p When a voice mail message of a videophone call is retained
at the Voice Mail Service Center, you are notified by an SMS
message.
p Make a voice call at “1412” to change the Voice Mail setting
for videophone calls.
p When a Chara-den call is connected to the Voice Mail
Service Center, DTMF operation is not available. Switch to
“Send DTMF tone” on the Function menu. (See page 71)
p When a call comes in while Voice Mail Service is set to
“Activate”, the ring tone (specified by “Select ring tone”) will
sound. (You can change the ring time for incoming calls. See
page 365.) If you answer the call within the specified time,
you can start talking. If you do not answer, the call is
connected to the Voice Mail Service Center.
p You can just press keys to connect an incoming call to the
Voice Mail Service Center. Also, you can connect the call
that comes in during a call to the Center.
Step 1: Set the service to “Activate”.
Step 2: The caller records a voice/video message.
※
Step 3: Play back the message.
※ If the caller wants to skip playback of the answer message
and record a message such as when in a hurry, he/she can
immediately switch to the recording mode by pressing “#”
while the answer message is played back.
Voice Mail
Using Voice Mail Service
Basic Flow of Voice Mail Service
<>