User's Manual Part 3

362
Character Entry
When you press two numeric keys to enter two-digit
numerals, a character (symbol) that corresponds to the
numerals is entered. Press the first key to list candidate
characters (symbols) at the lower part of the display.
To list candidate characters, you need to set “2/
NIKO-touch guide” to “ON” in advance.
p See page 411 for how characters are assigned to the
numeric keys (2-touch).
p See page 356 for switching to “2-touch”.
Press l ( ) from the Character Entry (Edit)
display to switch input modes. You might not be able to
switch to some modes depending on the function you
enter.
<Example> Enter “
タダの菓子 ” into a text memo.
1
m Stationery  Text memo
 Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana
input mode.
た→ 41
だ→ 41 , a
の→ 55
か→ 21
し→ 32
p
To enter “ ゛ ” or “ ゜ ”, enter the character and then press
a .
p Press 80 to switch between uppercase and
lowercase. You can switch uppercase and lowercase
also by entering the character that can be switched
between uppercase and lowercase and pressing
d .
After entering hiragana characters, go to step 3 on
page 356.
Dictionary info You can display the dictionary title and
version.
Delete this  YES
Delete all  Enter your Terminal Security Code  YES
Information
<Edit title>
p If you delete all the characters entered as a title, the title is
reset to the default.
Mode 2 (2-touch)
Entering Characters in Mode 2
(2-touch)
Switch Input Modes (2-touch)
Enter Characters
Function menu Operation/Explanation
<>
When you press two numeric keys to enter two-digit
numerals, a character (symbol) that corresponds to the
numerals is entered. Press the first key to list candidate
characters (symbols) at the lower part of the display.
To list candidate characters, you need to set “2/
NIKO-touch guide” to “ON” in advance.
p See page 412 for how characters are assigned to the
numeric keys (NIKO-touch).
p See page 356 for switching to “NIKO-touch”.
Press l ( ) from the Character Entry (Edit)
display to switch input modes. You might not be able to
switch to some modes depending on the function you
enter.
<Example> Enter “
タダの菓子 ” into a text memo.
1
m Stationery  Text memo
 Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana
input mode.
た→ 41
だ→ 41 , a
の→ 55
か→ 21
し→ 32
p
To enter “ ゛ ” or “ ゜ ”, enter the character and then press
a .
p Enter the character that can be switched between
uppercase and lowercase and press
d ; then you
can switch.
After entering hiragana characters, go to step 3 on
page 356.
Mode 3 (NIKO-touch)
Entering Characters in Mode 3
(NIKO-touch)
Switch Input Modes (NIKO-touch)
Enter Characters
<>