User's Manual Part 3

361
Character Entry
You can paste cut or copied characters.
1
Character Entry (Edit) display
 Move the cursor to a start position for
pasting
i ()  Paste
In Own Dictionary, you can store up to 100 frequently
used words with your favorite reading.
1
m Stationery  Common phrase/dic.
 Own dictionary  <New>  Enter a word.
p Select a stored Own dictionary to check the stored contents.
p You can enter up to 10 full-pitch/20 half-pitch
characters. However, you cannot enter line feeds.
2
Enter a reading.
p You can enter up to 10 hiragana characters.
Also, you cannot store symbols other than “Long vowel
(
ー )”. However, you can store “ ゛ ” or “ ゜ ” for the words
to which “
゛ ” or “ ゜ ” can be attached.
p Even if you enter a space, the word is stored with the
space automatically deleted.
Information
p If you copy/cut the Deco-mail text during composing and paste
it, the information about the decoration is pasted as well.
p You might not be able to cut or copy data such as Deco-mail
text because the memory space runs short.
Paste
+m-3-8
Own Dictionary
Storing Words in Own Dictionary
<>
Function Menu while Own Dictionary is Displayed
Function menu Operation/Explanation
New Go to step 1 of “Storing Words in Own
Dictionary” on page 361.
Edit Go to step 1 of “Storing Words in Own
Dictionary” on page 361.
p You can edit also by pressing l ().
Delete this  YES
Delete
selected
 Put a check mark for own dictionaries to
be deleted
l ()  YES
Delete all  Enter your Terminal Security Code  YES
Information
<Delete this> <Delete all>
p When you display Own Dictionary from the Function menu of
the Character Entry (Edit) display, select “Delete” from the
Function menu, then select “Delete this” or “Delete all”.
The character strings once you entered are
automatically stored and displayed as the conversion
candidates of learned words.
1
Function menu while entering (editing)
characters
 Char. input/dict.
 Learned words  Select a column
 Select a record.
p To delete learned words, press i ( ) and select
“Delete this” or “Delete all”, then select “YES”. If you
select “Delete all”, you need to enter your Terminal
Security Code.
You can reset the learned words.
1
m Settings  Other settings
 Character input method
 Reset learned words
 Enter your Terminal Security Code  YES
You can make dictionaries downloaded (see page 162)
from sites valid.
1
m Stationery  Common phrase/dic.
 Download dictionary
 Select a downloaded dictionary.
The downloaded dictionary you have selected is validated
and indicated by “
★ ”.
p To invalidate a downloaded dictionary, perform the
same operation.
p You can validate up to five downloaded dictionaries.
p You can delete the pre-installed dictionaries. You can
re-download them from the “P-SQUARE” site (see
page 163). When you use a UIM other than the one
used for downloading, the UIM restrictions (see
page 39) are set to them.
<Delete selected>
p “Delete selected” does not appear when you display Own
Dictionary from the Function menu of the Character Entry
(Edit) display.
Checking Learned Words
Information
+m-3-5
Reset Learned Words
+m-3-8
Download Dictionary
Using Downloaded Dictionary
<>
Function Menu while Downloaded Dictionary is Displayed
Function menu Operation/Explanation
Edit title  Edit the title.
p You can enter up to 10 full-pitch/20
half-pitch characters.
Set dictionary You can set the dictionary valid/invalid. Each
time you operate, valid and invalid switch.
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ