User's Manual Part 3
354
Other Convenient Functions
You can reset the items indicated by of
“Function List” to their default. (See page 394)
1
m
Settings
Other settings
Reset settings
Enter your Terminal Security Code
YES
You can delete the stored data and reset the setting
contents of each function to the default.
See “Function List” for the setting at purchase. (See
page 394)
p
You cannot delete the pre-installed data. However, all
downloaded dictionaries are deleted including the
pre-installed dictionaries.
Bluetooth info
You can display the device name, Bluetooth
address, device class, and supported profiles
of Bluetooth mounted on the FOMA phone.
You can change the device name.
p
To change the device name, press
l
( ), enter the device name. You
can enter up to 16 full-pitch/32 half-pitch
characters.
Information
<Set authentications>
p
While a Bluetooth device to which Phonebook entries are
sent is connected using a service other than Object Push,
the Phonebook entries are sent with authentication and with
encryption regardless of this setting.
p
You cannot set this function while a Bluetooth device is
connected or on standby for connection.
<Forward ring tone>
p
You cannot set this function while a Bluetooth device using
the Headset service or Hands-free service is connected or
on standby.
<Bluetooth info>
p
If you select a pictograph for the device name, it might not
be correctly displayed depending on the destination
Bluetooth device.
+m-2-3
Reset Settings
Resetting Function Settings
Item Operation/Explanation
<>
Information
p
You cannot execute “Reset settings” while a Bluetooth
device is connected or on standby for connection.
p
You cannot execute “Reset settings” during IC Card Lock
while “PIM/IC security mode” is set to “Face reader” or
“Double security”.
p
After you execute “Reset settings”, the tickers are not
displayed. Then, when the information is automatically
updated or you press
+Zo
to receive the latest information,
the tickers automatically flow.
Initialize
Deleting Stored Data All at Once
<>
p
You cannot delete the pre-installed i-
α
ppli programs.
p
You can delete the data stored in the pre-installed i-
α
ppli
programs. However, you cannot delete the data stored in the
Osaifu-Keitai compatible i-
α
ppli programs.
p
The protected data is also deleted.
p
All the stored data files are deleted regardless of the mode of
2in1.
p
Even if you have deleted the pre-installed Deco-mail
templates, Chara-den images, Kisekae Tool files, PDF files,
or Decomail-pictographs, they are restored when you
execute “Initialize”. However, if you delete the pre-installed
i-
α
ppli programs, they are not restored.
p
Charge the battery full before initializing the FOMA phone.
When the battery level is not enough, you may not be able to
initialize the FOMA phone.
p
During initialization, never turn off the power of the FOMA
phone.
p
You cannot use other functions during initialization. Also, you
cannot receive calls or mail messages.
1
m
Settings
Other settings
Initialize
Enter your Terminal Security Code
YES
YES
When initializing ends, the power automatically turns off
and then turns on and the “Initial setting” display appears.
Information
p
You cannot execute “Initialize” while a Bluetooth device is
connected or on standby for connection.
p
You cannot execute “Initialize” during IC Card Lock while
“PIM/IC security mode” is set to “Face reader” or “Double
security”.
p
You cannot delete the data saved to, stored in, or set for the
UIM or the microSD memory card.
p
You cannot delete the setting of data communication set by
a personal computer.
p
To restore the downloaded dictionaries and i-
α
ppli
programs, download them from the “P-SQUARE” site. For
downloading, you are charged an additional communication
fee.
p
After you execute “Initialize”, the tickers are not displayed.
Then, when the information is automatically updated or you
press
+Zo
to receive the latest information, the tickers
automatically flow.
p
After you initialize the FOMA phone, you cannot
automatically obtain Music&Video Channel programs.
Access the Setting Confirmation display from the
Music&Video Channel menu to reflect the program setting.
p
Initialization may take a while if the data to be deleted is
bulky.