User's Manual Part 3

352
Other Convenient Functions
When you connect your FOMA phone to a Bluetooth
device using Audio service, you can output the sound
of One Seg programs from the Bluetooth device.
1
Connect a Bluetooth device using Audio
service.
See page 350 for connecting a Bluetooth device.
2
Watch a One Seg program.
The sound is output from the Bluetooth device.
p When the confirmation display appears asking whether
to start the output to the Bluetooth device, select “YES”.
p For operations from a Bluetooth device, refer to the
instruction manual for the Bluetooth device.
■ Selecting whether to talk over the FOMA phone or a
Bluetooth device
Press and hold h for at least one second during a call.
p During a call with the FOMA phone while connecting using
Headset service, you can switch only from the Bluetooth
device.
p For operations from the Bluetooth device, refer to the
instruction manual for the Bluetooth device you use.
p You cannot talk over a Bluetooth device while USB
Hands-free compatible device or Flat-plug Earphone/
Microphone with Switch (option) or Flat-plug AV Output
Cable (option) is connected even if you switch to the
Bluetooth device.
p You cannot switch to a Bluetooth device while Remote
Monitoring is activated.
Information
p When a call comes in while the Bluetooth device is
connected using Headset service or Hands-free service, the
ring tone sounds from the Bluetooth device even if Manner
Mode is activated or “Ring volume” is set to “Silent” on the
FOMA phone.
p During a call on the Bluetooth device, you cannot adjust the
sound volume of the Bluetooth device by adjusting that on
your FOMA phone.
p During a call on the Bluetooth device, the call state does not
change by closing the FOMA phone regardless of the
setting of “Setting when folded”.
p When the Bluetooth is disconnected during a call on the
Bluetooth device, the call state follows the setting of
“Disconnection settings”. However, when it is disconnected
while the FOMA phone is closed and “Disconnection
settings” is set to “Continue on the phone”, the call shifts to
the state as specified by “Setting when folded”. When
“Setting when folded” is set to “End the call”, the call shifts
to “No tone” state.
Play Back Audio of One Seg Programs
Using Bluetooth Device
When you connect your FOMA phone to a Bluetooth
device using Audio service, you can output the sound
of moving images or video, music via MUSIC Player,
etc., from the Bluetooth device.
1
Connect a Bluetooth device using Audio
service.
p See page 350 for connecting a Bluetooth device.
p If you connect using Audio service from the Bluetooth
device while placing an Audio service on standby for
connection, MUSIC Player starts automatically.
However, it might not start automatically when a display
other than Stand-by display is shown or another
function is activated. Further, you cannot connect using
Audio service from Wireless Earphone Set P01.
■ When using Wireless Earphone Set P01 (option)
 Select the next channel.
 Select the previous
channel.
 Adjust the sound volume.
You can adjust the volume
consecutively by pressing
and holding it.
p For detailed operations, refer to the instruction manual for
Wireless Earphone Set P01.
Information
p You can play back the audio of One Seg programs only on
an A2DP compatible Bluetooth device that supports
copyrighting by the SCMS-T. Open first the One Seg Viewer
display, and then operate Wireless Earphone Set P01. If
you have been operating Wireless Earphone Set P01
before you open the display, the audio might not be played
back.
p While you are playing back the audio from a One Seg program
via a Bluetooth device, you cannot adjust the sound volume of
the Bluetooth device by adjusting that on your FOMA phone.
p You cannot play back the audio from the Bluetooth device
when the Flat-plug Stereo/Earphone Set (option) or Flat-plug
Earphone/Microphone with Switch (option) is connected.
p If the audio from a One Seg program stops while it is played
back on the Bluetooth device, check your FOMA phone as
the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･ When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “Book
program” or “Timer recording” sounds
In these cases, the Audio service might be disconnected
depending on the Bluetooth device. To resume playback on
the Bluetooth device, you need to re-connect the Audio
service.
Play Back Sound/Music of Moving Image
or Video Using Bluetooth Device

