User's Manual Part 3

350
Other Convenient Functions
You can register a Bluetooth device to the FOMA
phone. You can register up to 10 Bluetooth devices.
1
m LifeKit  Bluetooth  Device list  YES
The Bluetooth devices around the
FOMA phone are searched.
You need to place the Bluetooth
device to be registered on standby
for registration beforehand.
Up to 20 searched devices are
listed on the Device List.
p You can search for Bluetooth
devices also by pressing
l ( ) from the Device
List.
p When any Bluetooth devices have already been
registered, Device List is displayed and those registered
ones are displayed.
2
Select a Bluetooth device to be registered
 YES  Enter your Terminal Security Code.
3
Select the text box for entering the
Bluetooth passkey
 Enter the Bluetooth passkey  Set
p You can enter up to 16 half-pitch
alphanumeric characters.
p For the Bluetooth passkey, refer
to the instruction manual for the
Bluetooth device.
4
Select a service to be connected.
The Bluetooth device is connected
and “ (blue)” blinks. When no
communication with the Bluetooth
device is made for a certain period
of time, your FOMA phone is
placed in low power consumption mode, and “ (black)”
stays on.
p When you use the Bluetooth device which is able to
connect multiple services, the confirmation display
appears asking whether to connect another service in
succession.
p “ (blue)“ is displayed during connection, (gray)”
is displayed on standby for connection next to the
service name.
p If you select “Dial-up”, the FOMA phone is placed on
standby for connection.
p To disconnect, select the connected service and select
“YES”.
p See “Place the Bluetooth Devices on Standby for
Connection” on page 351 for how to cancel the service
on standby.
Register Bluetooth Device
Service Selection display
You can connect the registered Bluetooth device to the
FOMA phone.
1
m LifeKit  Bluetooth  Device list
 Select a Bluetooth device to be connected
 Select a service to be connected.
p For details, see step 4 on page 350.
■ Device List
 Device class
Following icons are
displayed according to the
type of Bluetooth device:
“”, “”, “”, “”,
“”, “”, “”
 Device name
The name of Bluetooth device is displayed.
When no name is detected by search, the Bluetooth
address is displayed.
 Connecting status
： Being connected ： Not connected
： Not detected ： Not registered
 Protect
Displayed when the registered contents are protected.
 Profile state
The state of each profile is displayed in color.
Information
p When 10 Bluetooth devices have already been registered,
the confirmation display appears asking whether to
overwrite them. When you select “YES”, the Bluetooth
device that is not protected, or not set for “Preferred device”
and with the oldest communication data/time, except in
communicating or in standby state, is overwritten.
p You cannot activate Bluetooth during Self Mode.
Connect to Bluetooth Device
Device List Service Selection displa
y
Information
p When the Bluetooth device is turned off or when the
Bluetooth device does not respond while a connection is
being established or being disconnected, it takes maximum
about 110 seconds for processing.





Device List
Mark
Character
color
Background
color
Frame
color
Status
Blue Gray None
Not connected
(unregistered)
Blue Gray Blue
Not connected
(registered)
White Green None Being connected
Green White Green
Standby for
connection
White Light green None Preferred device
Gray Gray None Not supported