User's Manual Part 3
349
Other Convenient Functions
○
: Output from the Bluetooth device.
L
: Not output from the Bluetooth device, instead it is played
back from the FOMA phone.
※
1 The ring tone sounds from both the Bluetooth device and
FOMA phone when “Headset usage setting” is set to
“Headset + speaker”.
※
2 The ring tone sounds from the FOMA phone when
“Forward ring tone” is set to “OFF”.
※
3 The i-motion playback tone does not sound during
obtaining from sites.
※
4 The alarm tone sounds from the Bluetooth device only
during a call. The alarm tone that sounds from the
Bluetooth device is not the one set for Alarm. It beeps.
※
5 The alarm tone/mail ring tone does not sound when a
display other than the Stand-by display is shown.
※
6 The tone sounds only during music playback.
p
Some Bluetooth devices might not work as specified in the
table above.
Connected service
HSP HFP A2DP
PushTalk ring tone
LL
○
※
6
Information
p
Refer to the instruction manual for a Bluetooth device as well.
Notes on using Bluetooth devices
■
Observe the following to make a good connection:
p
The distance between your mobile phone and another
Bluetooth device must be within 10 meters under line-of-sight
conditions. The allowable connection distance may be shorter,
depending on the ambient environment (such as walls or
furniture) and the structure of a building. When there are any
obstructions between the FOMA phone and Bluetooth device,
the allowable connection distance may also be shorter.
Particularly, if there is a wall or floor of reinforced concrete
between them, they may be unable to connect with each other.
Above mentioned connection distance is not guaranteed.
p
During connection, keep Bluetooth devices as possible as
away from other electric devices (such as home electric
appliances, AV devices, OA devices). (The Bluetooth
device is liable to be adversely affected by a microwave
oven so keep as possible as away from the microwave
oven.) Otherwise, normal connection cannot be performed
when electric devices are powered on or Bluetooth devices
may cause noises or a reception failure on a television or
radio set (television images may degrade for particular
channels of UHF or satellite broadcasting).
p
If there is a broadcast station or radio near a Bluetooth
device to which you want to connect, your FOMA phone
may be unable to connect with the Bluetooth device. In
such a case, move the Bluetooth device to a place where
connection is possible. Strong radio waves may prevent
connection between Bluetooth devices.
p
With a Bluetooth device put in your bag or pocket, you can
make a wireless connection. However, if the Bluetooth device
and FOMA phone is separated by your body, communication
speed might be lowered or noise could result.
For a Bluetooth device to be available, you need to register
the Bluetooth device to your FOMA phone beforehand and
connect them using a service that supports each function.
<Example> For connecting Wireless Earphone Set P01 (option)
■
Radio interference with wireless LANs
Bluetooth devices use the same frequency band (2.4GHz) as
wireless LANs (IEEE802.11b/g). Therefore, if a Bluetooth
device is used near a wireless LAN device, radio interference
may cause lowering of the communication speed, noise or
connection fail. In this case, take the following measures:
p
Keep your FOMA phone and the wireless
connection-target Bluetooth device away from the wireless
LAN device 10 meters or more.
p
When you use them within a distance of 10 meters, turn off
the power to the wireless LAN device.
■
Radio waves generated from the Bluetooth device
may possibly give an adverse effect on electronic
medical appliances.
As an accident could result in some cases, make sure that
you turn off the power to the FOMA phone and Bluetooth
devices in places as shown below:
・
On trains
・
In airplanes
・
In hospitals
・
Nearby automatic doors or fire alarms
・
In places such as gas stations where flammable gas is
generated
Bluetooth Usage Flow
Register Wireless Earphone Set P01 to the FOMA phone.
(See page 350)
Connect using the compatible service for the desired
function. (See page 350)
To talk on the phone using
Bluetooth
To play back the audio of
One Seg, audio of moving
images or video files, or
music files using Bluetooth
Connect using the
Hands-free service.
Connect using the Audio
service.
Make a call using
Wireless Earphone Set
P01. (See page 351)
Play back the audio of
One Seg using Wireless
Earphone Set P01.
(See page 352)
Play back the audio of
moving images or video
files, or music files using
Wireless Earphone Set P01.
(See page 352)