User's Manual Part 3
347
Other Convenient Functions
1
During ringing
Press the switch of the
Flat-plug Earphone/Microphone with Switch.
A beep sounds and you are connected.
With a videophone call, a camera image is sent to the
other party. You can switch between the camera image
and the substitute image by pressing
m
during the
videophone call. (See page 70)
p
You can use it also with the FOMA phone closed or in
Horizontal Open Style. If you receive a videophone call
in Horizontal Open Style, substitute image is sent to the
other party.
p
You can answer calls also by operating the FOMA
phone.
p
When “Auto answer setting” is set to “ON”, a call is
answered automatically after the ring time elapsed.
2
After talking, press and hold the switch of
the Flat-plug Earphone/Microphone with
Switch for at least one second to end the
call.
A beep sounds twice and you are disconnected.
Receive Calls Using Flat-plug
Earphone/Microphone with Switch
Information
p
Regardless of the setting for “Keypad sound”, a tone for
connecting and disconnecting the line sounds.
p
Note that you might be connected if you try to connect the
Flat-plug Earphone/Microphone with Switch after the ring
tone sounds.
p
To release hold, press the switch of the Flat-plug Earphone/
Microphone with Switch during answer-hold (On Hold) and
while a call is on hold (Holding). (When a videophone call is
put on hold, the camera image is sent and the videophone
call starts.)
p
Do not press or release the switch of the Flat-plug
Earphone/Microphone with Switch in succession. You might
be automatically connected.
p
If you have signed up for Call Waiting Service and “Multi
calling” is displayed during a call, you can switch two calls
by pressing and holding the switch of the Flat-plug
Earphone/Microphone with Switch for at least one second.
However, you cannot use the switch to end the call.
p
You can adjust the earpiece volume by pressing
.<
(raise)
or
.>
(lower) during a call.
When “Headset switch to call” is set to “Voice call” and
the Stand-by display is shown, you can press the
switch on the Flat-plug Earphone/Microphone with
Switch (option) to make voice calls.
1
m
Settings
Other settings
Headset switch to call
Voice call or OFF
p
You can check the currently set phonebook entry by
pressing
l
().
2
Search the Phonebook
Select an entry.
If a call comes in while the Flat-plug Earphone/
Microphone with Switch (option) is connected, the
FOMA phone automatically answers the call after the
specified ring time elapses.
1
m
Settings
Incoming call
Auto answer setting
ON or OFF
Enter a ring time (seconds).
p
Enter from “001” through “120” in three digits.
p
You cannot set the same ring time for Remote
Monitoring, Auto Answer Setting and Record Message
Setting. Set a different time for each.
Headset Switch to Call
Selecting a Call Destination
when Earphone is Connected
<>
Information
p
When the Phonebook entry contains multiple phone
numbers, the first phone number will be set.
p
If you delete the set Phonebook entry, the Phonebook entry
stored in the memory number 999 is automatically set to
Headset Switch to Call.
+m-9-4
Auto Answer Setting
Answering a Call Automatically
when Earphone is Connected
<>
Information
p
When the FOMA phone automatically answers a videophone
call, a substitute image is sent to the other party. You can
switch between the substitute image and the camera image
by pressing
+m
during the videophone call. (See page 70)
p
If you activate Voice Mail Service or Call Forwarding Service
together with Auto Answer Setting and want to give priority to
Auto Answer Setting over the service, set its ring time shorter
than that for Voice Mail Service or Call Forwarding Service.
p
Even if you connect the Flat-plug Earphone/Microphone with
Switch while ringing, Auto Answer Setting does not work.
However, if you disconnect it while ringing, Auto Answer
Setting works.
p
During 64K data communication or connecting Flat-plug AV
Output Cable (option), Auto Answer Setting does not work.