User's Manual Part 3

344
Other Convenient Functions
1
m Settings  Call time/cost  Call data
Last call duration
Talk: Displays the call duration of the latest voice call.
Videophone: Displays the call duration of the latest
videophone call.
Non-limiting digital: Displays the call duration of the
latest 64K data communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
Videophone: Displays the call cost for the latest
videophone call.
Non-limiting digital: Displays the call cost for the latest
64K data communication.
Total calls duration
Talk: Displays the call duration of voice calls from the
time Reset Total Duration was executed to the
current time.
Digital: Displays the call duration of videophone calls
and 64K data communication from the time
Reset Total Duration was executed to the
current time.
Total calls
Displays the call cost from the time Reset Total Cost
was executed to the current call.
Calls reset
Displays the date and time when Reset Total Duration
was executed last time.
Cost reset
Displays the date and time when Reset Total Cost was
executed last time.
Information
p When Last Call Duration exceeds “19 hours 59 minutes 59
seconds”, or Total Calls Duration exceeds “199 hours 59
minutes 59 seconds”, “0 s” returns to re-count the time.
p If you switch between the voice call and videophone call
during a call, the call duration and call cost are counted
respectively for the calls. You are not charged while
“Changing” (see page 52) is displayed.
p The duration/charge for PushTalk, i-mode communication
and packet communication are not counted. For how to
check the i-mode fee, refer to “Mobile Phone User’s Guide
[i-mode]” which is supplied on your i-mode contract.
p The charge for Chaku-moji is not counted.
p The international call fee for using WORLD CALL is
counted. The fees for using other international call services
are not counted.
p The duration for ringing and calling is not counted as call
duration.
p If you turn off the power or remove the UIM, Last Call
Duration is reset to “0 s”; and Last Call Cost is reset to
“¥
__ ”.
1
m Settings  Call time/cost
 Reset total cost&dura.
 Enter your Terminal Security Code
 Do the following operations.
You can set the call cost limit for Total Calls and can be
notified when it is exceeded. If you set “Auto reset
setting” to “ON”, the call cost is reset at midnight on
the 1st of the month and “ ” is deleted.
1
m Settings  Call time/cost
 Notice call cost
 Enter your Terminal Security Code
 ON or OFF  Enter a max cost.
p You can set from ¥10 through ¥100,000 in unit of ¥10.
2
Select a method to alert  ON or OFF
 Enter the PIN2 code.
p See page 118 for PIN2 code.
You can clear “ ” displayed by Notice Call Cost.
1
m Settings  Call time/cost
 CLR max cost icon
 Enter your Terminal Security Code.
+m-6-0
Reset Total Cost&Duration
Resetting Total Duration/Total Cost
<>
Item Operation/Explanation
Reset total
duration
You can reset Last Call Duration and Total
Calls Duration to “0 s”.
 YES
Reset total
cost
You can reset Last Call Cost and Total Calls
to “¥0”.
 YES  Enter the PIN2 code.
p See page 118 for PIN2 code.
Notice Call Cost
Setting Call Cost Limit
<>
■ When Total Calls has exceeded the max cost
“ ” appears. When “Icon + alarm” is set as a notice method
and the Stand-by display returns, the message to the effect
that the call cost has exceeded the maximum cost is
displayed, and a warning tone sounds from the speakers.
Clear Max Cost Icon
Information
p “ ” is cleared also by executing Reset Total Cost, Reset
Settings, or Initialize.
p To be re-notified of the set limit after the maximum cost is
exceeded, reset Total Calls.