User's Manual Part 3
332
Other Convenient Functions
Multiaccess enables you to simultaneously connect to
three lines; a voice call, packet communication, and SMS.
To switch the displays, press and hold
x
for at least
one second; or press
x
to switch from TASK
MENU. (See page 333)
See page 418 for details of combination of Multiaccess.
You can make a voice call without disconnecting
i-mode or packet communication.
1
During i-mode or packet communication
x
Stand-by display
The Stand-by display appears.
2
Make a call.
p
If you make a videophone call during i-mode, i-mode is
disconnected and the videophone call is made. After you
finish the videophone call, the i-mode display returns.
You can receive a voice call without disconnecting
i-mode or packet communication.
1
The Call Receiving display appears when a
call comes in
Press
d
to answer the call.
p
To return to the display for i-mode or packet
communication without answering the call, press and
hold
x
for at least one second. Press and hold
x
for at least one second again to return to the Call
Receiving display.
The caller hears not a message but a ringing tone.
You can use i-mode, send/receive i-mode mail, etc,
without disconnecting a voice call.
1
During a voice call
xm
()
Select an icon to operate each function.
Multiaccess
Multiaccess
<>
Voice call Single line
i-mode, i-
α
ppli, i-mode mail, packet
communication via PC
Single line
SMS Single line
Information
p
You are charged a fee for each line during Multiaccess.
Make a Voice Call during i-mode or
during Packet Communication
Receive a Voice Call during i-mode or
during Packet Communication
Use Communication during Voice Call
Information
p
When a mail message or Message R/F comes in during a
call, the ring tone does not sound and illumination does not
flicker regardless of the “Receiving display” setting.
The FOMA phone supports “Multitask” that enables
you to use up to three functions such as menu
functions (see page 31) at the same time.
By combining Multiaccess and Multitask, you can use
following functions simultaneously (see page 419 for
the combination patterns of Multitask):
■
Mail group
i-mode mail and SMS functions
■
i-mode group
Menu functions inside “i-mode group” on Main Menu
■
Setting group
Menu functions inside “Setting group” on Main Menu
■
Tool group
Menu functions inside “Tool group” on Main Menu
■
Other functions which do not belong to the groups
Voice call, videophone call, 64K data communication, etc.
1
When a function is running
x
m
()
Start another function.
For the icon of the group in use,
“ ” or another mark is added.
When a single function is used,
“ ” is displayed. When multiple
functions are used, “ ” is
displayed.
p
A ring tone sounds and the Receiving Result display
appears when “Receiving display” is set to “Alarm preferred”
except for the following cases:
･
During a call
･
While a camera is activated
･
When an i-
α
ppli program set for the Stand-by display is
running as an ordinary i-
α
ppli program
p
When you perform packet communication via a personal
computer, make a call-out operation from the personal
computer during a voice call.
Multitask
Multitask
Information
<>
Start Another Function
i-mode group
Tool group
Mail group
Setting group
When a function in the
Tool group is running