User's Manual Part 3

313
Data Display/Edit/Management
1
Play back a moving image/i-motion movie while
the Flat-plug AV Output Cable is connected
or
connect the Flat-plug AV Output Cable while a
moving image/i-motion movie is being played back.
p Press m ( ) to switch the
display size.
p See page 280 for how to play
back moving images/i-motion
movies and how to operate
during playback.
p To cancel AV output, pull the
Flat-plug AV Output Cable off of
the FOMA phone.
When another
function starts up, AV output is
canceled as well.
1
Make a videophone call while the Flat-plug
AV Output Cable is connected
or
connect the Flat-plug AV Output Cable
during a videophone call.
p “ ” appears during AV output.
p To cancel AV output, pull the
Flat-plug AV Output Cable off of
the FOMA phone.
When the
videophone call ends, or another
function starts up, AV output is
canceled as well.
Display Moving Images/i-motion
Movies on TV
Information
p AV output is not available in the following cases:
･ When the image is played back from any other than the
Moving Image List or icon pasted to the desktop
･ When playing back a moving image/i-motion movie whose
acquired source icon is “ ” or “ ”, and whose “File
restriction” is “File restricted”
･ When playing back a Chara-den movie you shot a Chara-den
model whose “Rec. file restriction” is “File restricted”
･ When a moving image/i-motion movie in the “Pre-installed”
folder, or “Movable contents” folder (microSD) is played back
p On some TVs, moving images may not be displayed
correctly when the display size is switched.
Display Images during a Videophone
Call on TV
Information
p You cannot execute AV output for the images of Remote
Monitoring.
p The sensitivity of the microphone is improved during AV
output.
1
Watch a One Seg program while the
Flat-plug AV Output Cable is connected
or
connect the Flat-plug AV Output Cable
during watching a One Seg program.
2
i ()  AV output  YES
p To cancel AV output, perform
the same operation or pull the
Flat-plug AV Output Cable off of
the FOMA phone.
When
watching One Seg programs
ends, or when another function
starts up, AV output is
canceled.
1
Start an i- α ppli program while the Flat-plug
AV Output Cable is connected
or
connect the Flat-plug AV Output Cable while
an i-
α ppli program is activated.
p To cancel AV output, pull the Flat-plug AV Output Cable
off of the FOMA phone. When an i-
α ppli ends, or when
another function starts up, AV output is canceled.
p “ ” (Hands-free icon) does not appear during AV output.
However, the voice is output from the connected device.
You cannot switch to Hands-free.
Display Video from One Seg
At One Seg start-up Released
Information
Information
p When “TV sound while closed” is set to “ON”, AV output still
continues even if you close the FOMA phone.
p The caption and data broadcasting are not displayed on TV.
p AV output is unavailable during recording or in ECO Mode.
p AV output is unavailable for video or still images recorded
by One Seg.
p The sound during AV output is output from a connected
device, so adjusting the sound volume of the FOMA phone
cannot change the output sound volume.
Display video from i- α ppli
Information
p AV output still continues even if you close the FOMA phone.
However, AV output is not available during pause in Power
Saver Mode.