User's Manual Part 3
441
Appendix/External Devices/Troubleshooting
2
Valid or Invalid
YES
p
When the scan function is set, an alert is shown by five levels if data that might cause failure is detected. (See page 442)
1
m
Settings
Lock/Security
Scanning function
Update
YES
YES
p
To cancel during i-mode connection, select “Cancel”.
2
OK
p
When pattern data update is not necessary, “Pattern definitions are up-to-date” is displayed.
Use the pattern data as it is.
You can set whether to update the pattern data inside your FOMA phone when the pattern data is created anew.
1
m
Settings
Lock/Security
Scanning function
Set auto-update
ON or OFF
2
YES
OK
p
When you select “ON” in step 1, the confirmation display appears telling that your mobile phone information is sent at
auto-update.
p
To cancel during i-mode connection, select “Cancel”.
Information
p
The scanning is not available for the SMS message which notifies you of receiving mopera mail or of incoming calls for Voice
Mail Service.
Update Pattern Data <Update>
Information
p
When updating the pattern data, the proper information about your FOMA phone (model name, serial number, etc.) is
automatically sent to the server (DoCoMo-managed server for the scanning function). We at DoCoMo never use the sent
information for other purposes than for the scanning function.
p
Set the date (year/month/date) for the FOMA phone correctly in advance.
p
The pattern data is not updated in the following cases:
・
When the date/time is not set
・
During a call
・
Out of the service area
・
When the UIM is not inserted
・
During Lock All
・
While another function is working
・
When connecting to external devices such as personal computers
・
While Self Mode is activated
p
If you cancel downloading midway, the data downloaded up to that point is deleted.
Update Pattern Data Automatically <Set Auto-update>
Information
p
When setting auto-update or updating automatically, the proper information about your FOMA phone (model name, serial
number, etc.) is automatically sent to the server (DoCoMo-managed server for the scanning function). We at DoCoMo never
use the sent information for other purposes than for the scanning function.
p
When auto-update is completed, the notification icon of “ ” (Update completed) appears on the Stand-by display.
If it is failed, “ ” (Pattern update failed) appears. Select “ ” to display the update result.