User's Manual Part 3

439
Appendix/External Devices/Troubleshooting
3
After confirming the update completion, select “OK”.
When downloading takes time or the server is busy, you can set in advance the date and time for starting the
software update by communicating with the server.
1
Select “Reserve” from the Software Update display.
The date and time which can be
reserved are displayed.
p The server’s time table appears
for the software update
reservation.
When you select “Others”
After communicating with the
server, you can select the date and time you want. The availability of each time zone is displayed on the time selection
display as follows:
○ : Available, △ : Almost full, × : Not available
When you select one time zone you want, you can communicate with the server again to display candidates for reserving
time.
2
Confirm the date and time you selected. Select “YES”. Your FOMA phone
communicates with the server again and then the reservation is completed.
Reserve Date and Time for Updating Software (Reserve Update)
■ When the reserved time comes
The display on the right appears and about five seconds later the software update starts
automatically.
Before the reserved time, fully charge the battery pack, place the FOMA phone with the Stand-by
display shown in a place within reach of radio wave.
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ