User's Manual Part 3

435
Appendix/External Devices/Troubleshooting
You can download new software programs automatically, then the updating is operated at the time you specified
beforehand.
When the rewriting state is ready, the “Rewrite notification” icon appears. Then you can confirm the rewrite time
and select whether to change the rewrite time or rewrite the program immediately.
p You cannot change “Set auto-update” when the notification icon of software update is displayed on the Stand-by display. In that
case, select the notification icon, and clear that icon without confirming whether the software update is required. You are then
able to change “Set auto-update”.
1
Set the date/time of updating.
2
Select the “Rewrite notification” icon on the Stand-by display, and select “OK”,
“Change time” or “Now rewrite”.
※ The “Rewrite notification” icon notifies you
that rewriting starts at the set time. (It is
cleared when you check it.)
※ After you select it, the Stand-by display returns, and then rewriting starts at the set time.
Update Software Programs Automatically <Set Auto-update>
When you select “OK”
Select the Rewrite
notification icon.
Rewrite notification icon
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ