User's Manual Part 3

305
Data Display/Edit/Management
You can send/receive the data files one by one using
infrared rays.
You can send/receive multiple still images, moving
images, and ToruCa files at a time.
■ Notes on sending/receiving
p In Secret Mode, you can send secret data as well. However,
in Secret Data Only, you can send only the secret data.
p If you receive a Phonebook entry stored as secret data in
“Secret mode” or “Secret data only”, the Phonebook entry is
stored as an ordinary one.
p When sending a Phonebook entry, you cannot send the
stored secret code and voice dial entry.
1
Display for a data item to be sent
i ()  Send Ir data
p To send a Phonebook entry, select “Send Ir data” from
the Function menu and select “Send phonebook”.
p To send a mail message, ToruCa file or bookmark,
select “Ir/ transmission” from the Function menu
and select “Send Ir data”.
p To send multiple files, select the files you want to send
by “Multiple-choice”. Press
i ( ) to select “Send
Ir data”.
2
YES
p To send multiple files, select “YES” by a factor of
selected number of files, and send them.
1
m LifeKit  Receive Ir data
p You can paste the Ir data receiving function to the
desktop. (See page 114)
2
Receive  YES
p When you receive Phonebook entries, the confirmation
display appears asking whether to store them also in
the PushTalk Phonebook.
p The confirmation display appears asking whether to
continue receiving after receiving one data file.
When you received multiple files, select “YES”.
Sending/Receiving One or
Multiple Data Files
Send One or Multiple Data Files
+m-7-9
Receive One or Multiple Data
Files
Information
p When you receive an instruction for starting a software
program, and you have already downloaded a compatible
software program, that software program starts. If you have
not put a check mark for “Ir
i α ppli To” of “Set i α ppli To”,
the software program does not start up automatically.
You can send/receive the following data files all at once
using infrared rays: the Phonebook entries, schedule
events, ToDo items, text memos, bookmarks, mail
messages, ToruCa files, and LCS client information.
To send all data files, enter a session number (any
four-digit number). The receiving end needs to enter
the same session number.
■ Notes on sending/receiving all data files
p Receiving all data files deletes all data you have stored
including the secret data and protected data, and the
received data overwrites the existing data. The data you
have stored in “Secret mode” is deleted as well. Check that
no important data is stored before receiving all data files.
p If you send all Phonebook entries, the “Own number” data is
also sent. All the data of “Own number” at the receiving end
is overwritten except the own number. Mail address is also
overwritten by sender’s address, so change it at the
receiving end.
p If you send all Phonebook entries, PushTalk Phonebook entries
are also sent. Information of voice dial entries are not sent.
p The Phonebook entries stored as secret data are sent not
only during Secret Mode but also any other time.
The sent secret data is stored as secret data at the receiving
end, too.
p The group names in the Phonebook you have received are
stored, so the data set in “Group setting” is also overwritten.
p Note that the schedule events at the receiving end are all
deleted if you send all ToDo items to the phone that does not
support ToDo.
p You can send/receive the protected sent/received mail
messages.
1
Display for a data item to be sent
i ()  Send all Ir data
 Enter your Terminal Security Code.
p To send the Phonebook entries, select “Send Ir data” from
the Function menu and select “Send all phonebook”.
p To send a mail message, a ToruCa file or a bookmark,
select “Ir/ transmission” from the Function menu
and select “Send all Ir data”.
2
Enter the session number  YES
p Enter any four-digit number as the session number.
Sending/Receiving All Data Files
Send All Data Files