User's Manual Part 2
213
i-
α
ppli
Function Menu of the Software List/IC Card List
Function menu
Operation/Explanation
Set
i
α
ppli To
You can set whether to permit the i-
α
ppli
program to start from links on sites or mail.
You can also set whether to start the i-
α
ppli
program when you place the FOMA phone
over an IC card compatible scanning device.
You can set this for each software program.
Put a check mark for items to be set
l
()
p
Some items might not be set depending on
the software program.
Auto start time
See page 221.
Software setting
(Stand-by set)
See page 221.
Software setting
(Network set)
You can set whether to communicate while
i-
α
ppli is running.
Network set
ON, OFF or Check every
start
l
()
p
If you select “Check every start”, the
confirmation display appears each time you
start it.
Software setting
(Stand-by net)
See page 222.
Software setting
(Icon info)
You can set whether to permit the i-
α
ppli to
use information of icons for the i-mode mail,
SMS messages, Messages R/F, battery level,
Manner Mode and the service area/out-of-
service area.
Icon info
ON or OFF
l
()
Software setting
(Change mld./
img.)
You can set whether to permit the i-
α
ppli to
change the setting for ring tones or the
Stand-by display. This function is available
only for i-
α
ppli DX.
Change mld./img.
ON, OFF or Check
every change
l
()
p
If you select “Check every change”, the
confirmation display appears each time you
change the setting for ring tones and the
Stand-by display from i-
α
ppli.
Software setting
(See P. book/
hist.)
You can set whether to permit the i-
α
ppli to
refer to the Phonebook, Redial, and Received
Calls. This function is available only for i-
α
ppli
DX.
See P. book/hist.
ON or OFF
l
()
Software setting
(View ToruCa)
You can set whether to permit the i-
α
ppli to
refer to ToruCa files. This function is available
only for i-
α
ppli DX.
View ToruCa
ON or OFF
l
()
Software setting
(Location
usage)
You can set whether to permit the i-
α
ppli to
use location information. This function is
available only for i-
α
ppli DX.
Location usage
ON or OFF
l
()
Software setting
(Program guide
key)
You can set the software program for the
Program Guide i-
α
ppli that starts up from One
Seg. You can set this for only the i-
α
ppli DX
that links to One Seg.
Program guide key
ON or OFF
l
()
Software info
You can display the software name and
version of the i-
α
ppli.
Upgrade
YES
Add desktop
icon
See page 114.
Delete
(Delete this)
Delete this
YES
Delete
(Delete
selected)
Delete selected
Put a check mark for
software programs to be deleted
l
()
YES
Delete
(Delete all)
Delete all
Enter your Terminal Security
Code
YES
Move to
microSD
See page 298.
Move to phone
See page 298.
Power saver
When “
α
Power saver” is set to “ON”, you can
set whether to validate Power Saver Mode for
each i-
α
ppli program.
ON or OFF
Information
<Software setting (Icon info)>
p
When you set “Software setting (Icon info)” to “ON” for the
i-
α
ppli Stand-by display, the icon information for unread
mail/message, battery level, Manner Mode, radio wave
strength and out-of-service area can be sent to the IP
(Information Provider) over the Internet in the same way as
the serial number of your mobile phone/UIM, and can be
deciphered by third parties.
p
When the software program needs “Software setting (Icon
info)”, the software program might not run if “OFF” is
selected.
Function menu
Operation/Explanation
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ