User's Manual Part 2
255
One Seg
■
When you set an alarm for “Book program” or “Timer
recording”
The icon appears on the desktop.
“”
. . . . . .Displayed when an alarm is set for today
(except the setting for past time).
“”
. . . . . .Displayed when an alarm is set for tomorrow
or onward only.
p
If you set “Display setting”
→
“Clock”
→
“Clock display” to
“OFF”, or set “Alarm” to “OFF” for a program booking, the
icons are not displayed.
■
When the time specified for “Book program” or
“Timer recording” comes
<Book Program>
The alarm sounds for about five minutes, and illumination
lights. The vibrator works as you set for “Phone” of
“Vibrator”. The set start date/time, channel, program name
and an animation appear on the display.
<Timer Recording>
About one minute before starting time, the alarm sounds for
about two seconds, and illumination lights. The vibrator works
as you set for “Phone” of “Vibrator”. The set start date/time,
end date/time, channel, program name and an animation
appear on the display, then the Viewer display appears.
p
During a call
The alarm sounds from the earpiece.
p
During operations
<Book Program>
When “Alarm setting” is set to “Operation preferred,” the
booking alarm notification is made only when the Stand-by
display is shown. When it is set to “Alarm preferred”, the
booking alarm notification is made even while you are
operating another function or during a call. (See page 341)
<Timer Recording>
Timer Recording works according to the setting of “Priority”
(see page 254). However, Timer Recording might not work
when you are reading to/writing from the microSD memory
card, or accessing the Data Storage Center.
p
When the booking alarm notification for a program booking
or timer recording is set to the same time of “Alarm”,
“ToDo”, or “Schedule”, the notification is made in the
priority order of “Alarm”
→
“Timer recording”
→
“ToDo”
→
“Schedule”
→
“Book program”.
A missed program booking or timer recording is notified by
the icon on the desktop.
p
When the power is turned off
The booking alarm notification is not made. For Timer
Recording, you cannot record a One Seg program unless
the power has been set to “ON” one minute before the start
date/time.
The icon does not appear on the desktop even after turning
on the power.
p
In Manner Mode
The vibrator, message display, and illumination light notify
you. The alarm sounds at the volume set for Manner Mode.
(See page 103)
p
During Lock All, Personal Data Lock or Omakase Lock
The booking alarm notification is not made. You cannot
record a One Seg program unless each lock is released
one minute before the start date/time.
After releasing each lock, the icon appears on the desktop
to inform you.
p
During infrared data exchange, during iC communication, or
while SD-PIM is operated, the booking alarm notification is
not made. You cannot record a One Seg program unless
each function is finished one minute before the start date/
time.
After each function is finished, the icon appears on the
desktop to inform you.
p
While updating software program
The booking alarm notification is not made. You cannot
record a One Seg program unless software update is
finished one minute before the start date/time.
When the specified time comes during updating software
program, the icon does not appear on the desktop even
after updating is completed.
■
To clear alarm tone/booking alarm message, and
animation for Book Program
The alarm tone stops by pressing any of the keys, but the
animation becomes a still image, and the booking alarm
message stays displayed. When “Activate TV w/ alarm” is
set to “OFF”, press any key again to clear. However, you
cannot clear the booking alarm message by pressing a side
key, with the FOMA phone closed. When a call comes in, the
alarm stops.
■
When “Activate TV w/ alarm” of Book Program is set
to “ON”
Press
Oo
( ) and select “YES” from the Booking
Alarm Notification display; then One Seg starts, and you can
watch the booked program.
If you start watching the booked program during recording,
the video recorded up to that point is automatically saved;
then the booked program appears.
Information
p
When you book programs or timer recordings with “Alarm
setting” set to “Alarm preferred”, and the booking alarm
time arrives while you are dialing, the alarm sounds after
you have called up the other party. When booking alarm
time arrives during ringing, the alarm sounds after
communication has started.
p
You might not be able to set some Chaku-uta Full
®
music
files for an alarm for a program booking.
p
When a Chaku-uta Full
®
music file is set for an alarm for a
program booking, only the audio is played back at the
specified time. The illumination for when you play back a
demo to select an alarm tone differs from for when you
are notified by an alarm.
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ